优化井距和着陆层以改进开发策略——以油田为例

P. Karam, Junjie Yang, K. Cozyris, Tim Stephenson, Xiaoxuan An, Chimok Jung, Jongyoung Jun, Hyun-Gun Lee
{"title":"优化井距和着陆层以改进开发策略——以油田为例","authors":"P. Karam, Junjie Yang, K. Cozyris, Tim Stephenson, Xiaoxuan An, Chimok Jung, Jongyoung Jun, Hyun-Gun Lee","doi":"10.2118/195241-MS","DOIUrl":null,"url":null,"abstract":"\n Sooner Trend Anadarko Canadian Kingfisher, also known as STACK, is a booming unconventional oil play in North America. As one of the main features that makes the asset profitable, multiple targeting benches raise a challenge of optimization. Well-developed natural fracture system brings in another level of complexity to estimate well spacing. This study introduces an integrated workflow to better understand the fluid flow mechanism in the reservoir and optimize development strategy.\n From borehole image log, natural fracture orientation and density was interpreted and statistically populated into geologic model along with petrophysical properties. To account for productivity enhancement due to natural fractures, enhanced permeability was embedded into the simulation model according to the distribution of discrete fracture network. After being history matched, the reservoir model was used to test the sensitivity on well spacing, landing zone and hydraulic fracturing pump schedule. Both infill drilling program and green field development scenarios were tested and compared to optimize our field development study.\n Production history match indicates that natural fractures serve as fluid flow conduit and contribute significantly to the production in Osage. Pressure transient observation shows a similar reservoir behavior in the Osage as opposed to the Woodford. Multiple wells experience productivity reduction over longer production history, indicating near-field damage (such as scaling) and/or far-field damage (such as fracture closure). Introduction of skin factor and pressure dependent permeability captured the trend on productivity behavior in the history match. In addition, the simulation study shed light on the hydraulic fracture geometry that provides direct insight on well spacing and landing zone analyses. Results from the infill drilling program show that staggered design with 3 Osage and 4 Woodford wells per section yields the higher oil recovery. However, using the greenfield sensitivities, and depending on the pumping schedule, hydraulic fractures from Woodford wells show upward growth, draining both formations effectively even without Osage wells.\n This study provides valuable information about the development strategy in STACK unconventional resources, particularly for scenarios with natural fracture system and multiple targeting zones. The simulation workflow considers well interference in both horizontal and vertical directions simultaneously to optimize oil recovery and reduce operational cost.","PeriodicalId":11150,"journal":{"name":"Day 2 Wed, April 10, 2019","volume":"14 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Well Spacing and Landing Zone Optimization to Improve Development Strategy - A Case Study from the Stack\",\"authors\":\"P. Karam, Junjie Yang, K. Cozyris, Tim Stephenson, Xiaoxuan An, Chimok Jung, Jongyoung Jun, Hyun-Gun Lee\",\"doi\":\"10.2118/195241-MS\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Sooner Trend Anadarko Canadian Kingfisher, also known as STACK, is a booming unconventional oil play in North America. As one of the main features that makes the asset profitable, multiple targeting benches raise a challenge of optimization. Well-developed natural fracture system brings in another level of complexity to estimate well spacing. This study introduces an integrated workflow to better understand the fluid flow mechanism in the reservoir and optimize development strategy.\\n From borehole image log, natural fracture orientation and density was interpreted and statistically populated into geologic model along with petrophysical properties. To account for productivity enhancement due to natural fractures, enhanced permeability was embedded into the simulation model according to the distribution of discrete fracture network. After being history matched, the reservoir model was used to test the sensitivity on well spacing, landing zone and hydraulic fracturing pump schedule. Both infill drilling program and green field development scenarios were tested and compared to optimize our field development study.\\n Production history match indicates that natural fractures serve as fluid flow conduit and contribute significantly to the production in Osage. Pressure transient observation shows a similar reservoir behavior in the Osage as opposed to the Woodford. Multiple wells experience productivity reduction over longer production history, indicating near-field damage (such as scaling) and/or far-field damage (such as fracture closure). Introduction of skin factor and pressure dependent permeability captured the trend on productivity behavior in the history match. In addition, the simulation study shed light on the hydraulic fracture geometry that provides direct insight on well spacing and landing zone analyses. Results from the infill drilling program show that staggered design with 3 Osage and 4 Woodford wells per section yields the higher oil recovery. However, using the greenfield sensitivities, and depending on the pumping schedule, hydraulic fractures from Woodford wells show upward growth, draining both formations effectively even without Osage wells.\\n This study provides valuable information about the development strategy in STACK unconventional resources, particularly for scenarios with natural fracture system and multiple targeting zones. The simulation workflow considers well interference in both horizontal and vertical directions simultaneously to optimize oil recovery and reduce operational cost.\",\"PeriodicalId\":11150,\"journal\":{\"name\":\"Day 2 Wed, April 10, 2019\",\"volume\":\"14 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-04-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Day 2 Wed, April 10, 2019\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2118/195241-MS\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 2 Wed, April 10, 2019","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/195241-MS","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

阿纳达科加拿大翠鸟,也被称为STACK,是北美一个蓬勃发展的非常规石油公司。作为资产盈利的主要特征之一,多目标平台提出了优化的挑战。发育良好的天然裂缝系统给井距估算带来了另一层复杂性。为了更好地理解储层流体流动机理,优化开发策略,本研究引入了集成工作流。根据井眼图像测井资料,对天然裂缝的走向和密度进行解释,并根据岩石物理性质统计填充到地质模型中。为了考虑天然裂缝带来的产能提高,根据离散裂缝网络的分布,将提高的渗透率嵌入到模拟模型中。经过历史拟合后,利用储层模型对井距、着陆层和水力压裂泵调度的敏感性进行了测试。为了优化油田开发研究,我们对钻井方案和绿地开发方案进行了测试和比较。生产历史匹配表明,天然裂缝是流体流动的管道,对奥塞奇地区的生产有重要贡献。压力瞬态观测表明,与Woodford相反,Osage的储层行为与Woodford相似。随着生产历史的延长,多口井的产能会下降,这表明近场损害(如结垢)和/或远场损害(如裂缝闭合)。引入表皮因子和压力相关渗透率捕捉了历史匹配中产能行为的趋势。此外,模拟研究揭示了水力裂缝的几何形状,为井距和着陆层分析提供了直接的见解。钻井方案的结果表明,每段3口Osage井和4口Woodford井的交错设计可获得更高的采收率。然而,利用绿地的敏感性,并根据泵送计划,Woodford井的水力裂缝呈上升趋势,即使没有Osage井,也能有效地排排两个地层。该研究为STACK非常规资源的开发策略提供了有价值的信息,特别是对于具有天然裂缝系统和多个目标区的情况。模拟工作流程同时考虑了水平方向和垂直方向的井干扰,以优化采收率并降低作业成本。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Well Spacing and Landing Zone Optimization to Improve Development Strategy - A Case Study from the Stack
Sooner Trend Anadarko Canadian Kingfisher, also known as STACK, is a booming unconventional oil play in North America. As one of the main features that makes the asset profitable, multiple targeting benches raise a challenge of optimization. Well-developed natural fracture system brings in another level of complexity to estimate well spacing. This study introduces an integrated workflow to better understand the fluid flow mechanism in the reservoir and optimize development strategy. From borehole image log, natural fracture orientation and density was interpreted and statistically populated into geologic model along with petrophysical properties. To account for productivity enhancement due to natural fractures, enhanced permeability was embedded into the simulation model according to the distribution of discrete fracture network. After being history matched, the reservoir model was used to test the sensitivity on well spacing, landing zone and hydraulic fracturing pump schedule. Both infill drilling program and green field development scenarios were tested and compared to optimize our field development study. Production history match indicates that natural fractures serve as fluid flow conduit and contribute significantly to the production in Osage. Pressure transient observation shows a similar reservoir behavior in the Osage as opposed to the Woodford. Multiple wells experience productivity reduction over longer production history, indicating near-field damage (such as scaling) and/or far-field damage (such as fracture closure). Introduction of skin factor and pressure dependent permeability captured the trend on productivity behavior in the history match. In addition, the simulation study shed light on the hydraulic fracture geometry that provides direct insight on well spacing and landing zone analyses. Results from the infill drilling program show that staggered design with 3 Osage and 4 Woodford wells per section yields the higher oil recovery. However, using the greenfield sensitivities, and depending on the pumping schedule, hydraulic fractures from Woodford wells show upward growth, draining both formations effectively even without Osage wells. This study provides valuable information about the development strategy in STACK unconventional resources, particularly for scenarios with natural fracture system and multiple targeting zones. The simulation workflow considers well interference in both horizontal and vertical directions simultaneously to optimize oil recovery and reduce operational cost.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信