Building a low cost low power wireless network to enable voice communication in developing regions

In this work, we describe our experiences in building a low cost and low power wireless mesh network using IEEE 802.15.4 technology to provide telephony services in rural regions of the developing world. 802.15.4 was originally designed for a completely different application space of non-real-time, low data rate embedded wireless sensing. We use it to design and prototype a telephony system, which we term as Lo3 (Low cost, Low power, Local voice). Lo3 primarily provides two use cases; (1) local and broadcast voice within the wireless mesh network, and (2) remote voice to a phone in the outside world. A Lo3 network can cost as less as $2K, and can last for several days without power "off the grid", thus making it an ideal choice to meet cost and power constraints of rural regions. We test deployed a full-fledged Lo3 system in a village near Mumbai, India for 18 hours over 3 days. We established voice calls with an end-to-end latency of less than 120ms, with an average packet loss of less than 2%, and a MOS of 3.6 which is considered as good in practice. The users too gave a positive response to our system. We also tested Lo3 within our department where it can be used as a wireless intercom service. To our knowledge, Lo3 is the first system to enable such a voice communication system using 802.15.4 technology, and show its effectiveness in operational settings.