用于WiGig模块的3D打印塑料和微加工聚四氟乙烯透镜的比较

2014 IEEE Antennas and Propagation Society International Symposium (APSURSI) Pub Date : 2014-07-06 DOI:10.1109/APS.2014.6904386

A. Bisognin, D. Titz, C. Luxey, G. Jacquemod, R. Pilard, F. Gianesello, D. Gloria, F. Ferrero, D. Lugara, Jorge R. Costa, C. Fernandes

{"title":"用于WiGig模块的3D打印塑料和微加工聚四氟乙烯透镜的比较","authors":"A. Bisognin, D. Titz, C. Luxey, G. Jacquemod, R. Pilard, F. Gianesello, D. Gloria, F. Ferrero, D. Lugara, Jorge R. Costa, C. Fernandes","doi":"10.1109/APS.2014.6904386","DOIUrl":null,"url":null,"abstract":"In this paper, we compare the performance of micromachined Teflon and 3D printed Plastic lenses for WiGig modules. Both are based on extended hemispherical shapes. Reusing a HDI module with built-in antenna as a source, we demonstrate an antenna gain improvement of respectively 9 dB and 11 dB for the Plastic and the Teflon lenses. Full-wave simulations are verified by measurements.","PeriodicalId":6663,"journal":{"name":"2014 IEEE Antennas and Propagation Society International Symposium (APSURSI)","volume":"10 1","pages":"109-110"},"PeriodicalIF":0.0000,"publicationDate":"2014-07-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Comparizon of 3D printed Plastic and micromachined Teflon Lenses for WiGig modules\",\"authors\":\"A. Bisognin, D. Titz, C. Luxey, G. Jacquemod, R. Pilard, F. Gianesello, D. Gloria, F. Ferrero, D. Lugara, Jorge R. Costa, C. Fernandes\",\"doi\":\"10.1109/APS.2014.6904386\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, we compare the performance of micromachined Teflon and 3D printed Plastic lenses for WiGig modules. Both are based on extended hemispherical shapes. Reusing a HDI module with built-in antenna as a source, we demonstrate an antenna gain improvement of respectively 9 dB and 11 dB for the Plastic and the Teflon lenses. Full-wave simulations are verified by measurements.\",\"PeriodicalId\":6663,\"journal\":{\"name\":\"2014 IEEE Antennas and Propagation Society International Symposium (APSURSI)\",\"volume\":\"10 1\",\"pages\":\"109-110\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2014-07-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2014 IEEE Antennas and Propagation Society International Symposium (APSURSI)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/APS.2014.6904386\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2014 IEEE Antennas and Propagation Society International Symposium (APSURSI)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/APS.2014.6904386","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

在本文中，我们比较了微加工聚四氟乙烯和3D打印塑料透镜用于WiGig模块的性能。两者都是基于扩展的半球形。使用内置天线的HDI模块作为源，我们演示了塑料透镜和聚四氟乙烯透镜的天线增益分别提高了9 dB和11 dB。全波仿真通过实测验证。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Comparizon of 3D printed Plastic and micromachined Teflon Lenses for WiGig modules

In this paper, we compare the performance of micromachined Teflon and 3D printed Plastic lenses for WiGig modules. Both are based on extended hemispherical shapes. Reusing a HDI module with built-in antenna as a source, we demonstrate an antenna gain improvement of respectively 9 dB and 11 dB for the Plastic and the Teflon lenses. Full-wave simulations are verified by measurements.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2014 IEEE Antennas and Propagation Society International Symposium (APSURSI)

自引率

0.00%

发文量