载荷力变化引起轴角变化的锥齿轮齿轮齿的有限元分析

IF 4 Q2 ENGINEERING, INDUSTRIAL

Journal of Industrial and Production Engineering Pub Date : 2022-06-30 DOI:10.24867/jpe-2022-01-005

Sándor Bodzás

{"title":"载荷力变化引起轴角变化的锥齿轮齿轮齿的有限元分析","authors":"Sándor Bodzás","doi":"10.24867/jpe-2022-01-005","DOIUrl":null,"url":null,"abstract":"Five types of bevel gears having different shaft angles were designed. In this publication the analysis of the tooth of pinions will be focused. Different load forces will be loaded on the top of the tooth on the surfaces of the face cones. The normal stresses and normal deformations of one tooth will be analysed into two perpendicular directions on both tooth sides. The aim is the foundation of the correlation between the mechanical parameters and the shaft angles by the different load forces.","PeriodicalId":16024,"journal":{"name":"Journal of Industrial and Production Engineering","volume":null,"pages":null},"PeriodicalIF":4.0000,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"FEM ANALYSIS OF THE TOOTH OF PINIONS IN CASE OF BEVEL GEARS HAVING THE MODIFICATION OF THE SHAFT ANGLES BY THE CHANGING OF LOAD FORCES\",\"authors\":\"Sándor Bodzás\",\"doi\":\"10.24867/jpe-2022-01-005\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Five types of bevel gears having different shaft angles were designed. In this publication the analysis of the tooth of pinions will be focused. Different load forces will be loaded on the top of the tooth on the surfaces of the face cones. The normal stresses and normal deformations of one tooth will be analysed into two perpendicular directions on both tooth sides. The aim is the foundation of the correlation between the mechanical parameters and the shaft angles by the different load forces.\",\"PeriodicalId\":16024,\"journal\":{\"name\":\"Journal of Industrial and Production Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.0000,\"publicationDate\":\"2022-06-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Industrial and Production Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.24867/jpe-2022-01-005\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, INDUSTRIAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Industrial and Production Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.24867/jpe-2022-01-005","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, INDUSTRIAL","Score":null,"Total":0}

引用次数: 0

摘要

设计了5种不同轴角的锥齿轮。在本出版物中，将重点分析齿轮的齿。不同的载荷力将被加载到齿面锥体表面的齿顶。将一颗牙齿的法向应力和法向变形分析为牙齿两侧的两个垂直方向。目的是建立在不同载荷作用下力学参数与轴角之间关系的基础。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

FEM ANALYSIS OF THE TOOTH OF PINIONS IN CASE OF BEVEL GEARS HAVING THE MODIFICATION OF THE SHAFT ANGLES BY THE CHANGING OF LOAD FORCES

Five types of bevel gears having different shaft angles were designed. In this publication the analysis of the tooth of pinions will be focused. Different load forces will be loaded on the top of the tooth on the surfaces of the face cones. The normal stresses and normal deformations of one tooth will be analysed into two perpendicular directions on both tooth sides. The aim is the foundation of the correlation between the mechanical parameters and the shaft angles by the different load forces.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Industrial and Production Engineering ENGINEERING, INDUSTRIAL-

CiteScore

7.50

自引率

6.70%

发文量