Hydraulic Fracturing in the Upper Humboldt River Basin, Nevada, USA

Water-quality and isotopic data were collected in central Nevada, USA in an exploration hydraulic fracturing area with no previous oil or gas production. The target shales of the Elko Formation are unique fresh-water hydrocarbon reservoirs with relatively dilute source water (8.5 g/L total dissolved solids [TDS]). Additionally, the Elko Formation is underlain by a fresh-water carbonate aquifer (0.2-0.3 g/L TDS) that outcrops downgradient of the exploration area. The water quality and isotopic data were used to evaluate pre-hydraulic fracturing conditions in this undeveloped area. The same data were also collected for groundwater and surface-water sites about two months and one year after exploration hydraulic fracturing. No systematic differences in water chemistry were observed between pre- and post-hydraulic fracturing samples. Based on water chemistry of shallow groundwater, surface water, and from the production zone, the most useful constituents identified for monitoring for potential future incursion of reservoir-associated fluids into the near-surface environment are TDS (or electrical conductivity), chloride, propane, methanol, ethanol, and 2-butoxyethanol. Groundwater flow and transport models were developed to evaluate the potential movement of hydrocarbons and hydraulic fracturing fluids from the targeted zones, which are about 1800 to 3600 m beneath the land surface, to shallow groundwater (<300 m below land surface). Model simulations indicate that hydraulic fracturing fluid remains contained within the target shales for at least 1,000 years for most development scenarios.