{"title":"3D打印机械轮的原型","authors":"Krzysztof Mateja","doi":"10.31648/ts.8415","DOIUrl":null,"url":null,"abstract":"This article presents the results of work related to design, analysis and selection of the 3D printed mecanum wheels. Initial CAD model does not include material type of the rollers. Rollers were printed in 4 types of filament: PLA, ABS, PETG, FLEX. Analysis, tests and target destination of use allowed to choose the best material for rollers which will meet the usage requirements. Next step after choose material for roller were assembly of the wheels. Wheels were tested on the simple platform. Assembled 4 wheels (two left and two right) allowed to carry out tests to verify the mobility of the mobile robot and check the adhesion between rollers and ground.","PeriodicalId":41669,"journal":{"name":"Archives for Technical Sciences","volume":null,"pages":null},"PeriodicalIF":0.2000,"publicationDate":"2023-01-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Prototype of 3D printed mecanum wheel\",\"authors\":\"Krzysztof Mateja\",\"doi\":\"10.31648/ts.8415\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This article presents the results of work related to design, analysis and selection of the 3D printed mecanum wheels. Initial CAD model does not include material type of the rollers. Rollers were printed in 4 types of filament: PLA, ABS, PETG, FLEX. Analysis, tests and target destination of use allowed to choose the best material for rollers which will meet the usage requirements. Next step after choose material for roller were assembly of the wheels. Wheels were tested on the simple platform. Assembled 4 wheels (two left and two right) allowed to carry out tests to verify the mobility of the mobile robot and check the adhesion between rollers and ground.\",\"PeriodicalId\":41669,\"journal\":{\"name\":\"Archives for Technical Sciences\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.2000,\"publicationDate\":\"2023-01-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Archives for Technical Sciences\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.31648/ts.8415\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, GEOLOGICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Archives for Technical Sciences","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31648/ts.8415","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, GEOLOGICAL","Score":null,"Total":0}
This article presents the results of work related to design, analysis and selection of the 3D printed mecanum wheels. Initial CAD model does not include material type of the rollers. Rollers were printed in 4 types of filament: PLA, ABS, PETG, FLEX. Analysis, tests and target destination of use allowed to choose the best material for rollers which will meet the usage requirements. Next step after choose material for roller were assembly of the wheels. Wheels were tested on the simple platform. Assembled 4 wheels (two left and two right) allowed to carry out tests to verify the mobility of the mobile robot and check the adhesion between rollers and ground.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
