Electrosynthesis of Ni-Co/Hydroxyapatite as a Catalyst for Hydrogen Generation via the Hydrolysis of Aqueous Sodium Borohydride (NaBH4) Solutions

To generate hydrogen from its storage as NaBH4, a catalyst was synthesized via an electrochemical method. The catalyst, Ni-Co, had hydroxyapatite as a support catalyst. The electrochemical cell consisted of a DC power supply, a carbon anode and cathode, and a bipolar membrane to separate the cell into two chambers. The current density was adjusted to 61, 91, and 132 mA/cm2. The electrolysis time was 30, 60, and 90 min. The particles produced were analyzed by XRD and SEM/EDX and tested in the hydrolysis of NaBH4 for hydrogen generation. The Ni-Co/HA catalyst test concluded that the period of time used for electrolysis during catalyst formation was positively correlated with the rate of NaBH4 hydrolysis in the production of hydrogen. The highest rate of hydrogen production was obtained using the synthesized catalyst with a current density of 92 mA/cm2. The NaBH4 hydrolysis reaction followed a first-order reaction with the rate constant of (2.220–14.117)•10-3 l/(g•min). The Arrhenius equation for hydrolysis reactions within the temperature range of 300–323 K is k = 6.5•10-6exp(-6000/T).