风力涡轮机控制策略概述:ANNC, FLC, SMC, BSC和PI控制器

IF 1.5 Q4 ENERGY & FUELS

Wind Engineering Pub Date : 2022-12-01 DOI:10.1177/0309524X221109512

Mourad Yessef, B. Bossoufi, M. Taoussi, A. Lagrioui, Hamid Chojaa

{"title":"风力涡轮机控制策略概述:ANNC, FLC, SMC, BSC和PI控制器","authors":"Mourad Yessef, B. Bossoufi, M. Taoussi, A. Lagrioui, Hamid Chojaa","doi":"10.1177/0309524X221109512","DOIUrl":null,"url":null,"abstract":"The design of robust and precise control of obtaining maximum power yield is an important area of research in wind engineering. In the context of maximizing the amount of power extraction in wind energy conversion systems (WECS), this research work proposes and evaluates five MPPT algorithms. These types are respectively a proportional integral controller (PI), a non-linear control based on sliding modes (SMC), a backstepping approach (BSC), a control using artificial intelligence based on neural network (ANNC), and a fuzzy logic control (FLC). Two different wind profiles, a step wind profile and a real wind profile, were considered for the comparative study. The response time, dynamic error percentage, and static error percentage were the quantitative parameters compared, and the qualitative parameters included set-point tracking and precision. This test demonstrated the superiority of the ANNC controller with an error static that not exceed 0.39% and a response time ~0.0024 seconds.","PeriodicalId":51570,"journal":{"name":"Wind Engineering","volume":"29 1","pages":"1820 - 1837"},"PeriodicalIF":1.5000,"publicationDate":"2022-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":"{\"title\":\"Overview of control strategies for wind turbines: ANNC, FLC, SMC, BSC, and PI controllers\",\"authors\":\"Mourad Yessef, B. Bossoufi, M. Taoussi, A. Lagrioui, Hamid Chojaa\",\"doi\":\"10.1177/0309524X221109512\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The design of robust and precise control of obtaining maximum power yield is an important area of research in wind engineering. In the context of maximizing the amount of power extraction in wind energy conversion systems (WECS), this research work proposes and evaluates five MPPT algorithms. These types are respectively a proportional integral controller (PI), a non-linear control based on sliding modes (SMC), a backstepping approach (BSC), a control using artificial intelligence based on neural network (ANNC), and a fuzzy logic control (FLC). Two different wind profiles, a step wind profile and a real wind profile, were considered for the comparative study. The response time, dynamic error percentage, and static error percentage were the quantitative parameters compared, and the qualitative parameters included set-point tracking and precision. This test demonstrated the superiority of the ANNC controller with an error static that not exceed 0.39% and a response time ~0.0024 seconds.\",\"PeriodicalId\":51570,\"journal\":{\"name\":\"Wind Engineering\",\"volume\":\"29 1\",\"pages\":\"1820 - 1837\"},\"PeriodicalIF\":1.5000,\"publicationDate\":\"2022-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"7\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Wind Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1177/0309524X221109512\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Wind Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1177/0309524X221109512","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENERGY & FUELS","Score":null,"Total":0}

引用次数: 7

摘要

获得最大功率的鲁棒精确控制设计是风力工程研究的一个重要领域。本研究以风能转换系统(WECS)的取电量最大化为背景，提出并评估了五种MPPT算法。这些类型分别是比例积分控制器(PI)，基于滑模的非线性控制(SMC)，后退方法(BSC)，基于神经网络的人工智能控制(ANNC)和模糊逻辑控制(FLC)。采用阶梯风廓线和实风廓线两种不同的风廓线进行对比研究。定量参数为响应时间、动态误差百分比和静态误差百分比，定性参数为设定值跟踪和精度。实验结果表明，该控制器的静态误差不超过0.39%，响应时间为0.0024秒，具有较好的控制效果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Overview of control strategies for wind turbines: ANNC, FLC, SMC, BSC, and PI controllers

The design of robust and precise control of obtaining maximum power yield is an important area of research in wind engineering. In the context of maximizing the amount of power extraction in wind energy conversion systems (WECS), this research work proposes and evaluates five MPPT algorithms. These types are respectively a proportional integral controller (PI), a non-linear control based on sliding modes (SMC), a backstepping approach (BSC), a control using artificial intelligence based on neural network (ANNC), and a fuzzy logic control (FLC). Two different wind profiles, a step wind profile and a real wind profile, were considered for the comparative study. The response time, dynamic error percentage, and static error percentage were the quantitative parameters compared, and the qualitative parameters included set-point tracking and precision. This test demonstrated the superiority of the ANNC controller with an error static that not exceed 0.39% and a response time ~0.0024 seconds.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Wind Engineering ENERGY & FUELS-

CiteScore

4.00

自引率

13.30%

发文量

期刊介绍： Having been in continuous publication since 1977, Wind Engineering is the oldest and most authoritative English language journal devoted entirely to the technology of wind energy. Under the direction of a distinguished editor and editorial board, Wind Engineering appears bimonthly with fully refereed contributions from active figures in the field, book notices, and summaries of the more interesting papers from other sources. Papers are published in Wind Engineering on: the aerodynamics of rotors and blades; machine subsystems and components; design; test programmes; power generation and transmission; measuring and recording techniques; installations and applications; and economic, environmental and legal aspects.