Development and Performance Evaluation of a Hand-Pushed Tiger Nut Harvester

Harvesting is one of the major problems encountered by tiger nut farmers in Nigeria. Manual harvesting system is the most commonly used method. This process is costly, labour intensive and time-consuming. The process does not also give farmers adequate returns to enable them to break even due to huge losses encountered. The objective of this study was to design, construct and evaluate a hand-pushed harvester that would eliminate the challenges being faced by small and medium tiger nut farmers during harvesting. Materials selection for constructing the harvester were based on their durability and availability, affordability and ease of replacement if damaged. They include mild steel (3 mm, 5 mm), 30 mm galvanized steel hollow pipe, 10 mm diameter steel rod, and 400 mm steel tyre. The developed harvester was evaluated at the experimental farm of the Institute for Agricultural Research (IAR). Results of the study show that the average field capacity ranges from 0.28 – 0.33 ha/h while the average field efficiency was between 77.78 – 80.49% depending on operating speed, moisture content and other properties of the soil. No field damage was recorded when the harvester was used as against an approximate 10.50% damage recorded in the manual harvesting method.