提高电化学稳定性的电沉积钴涂层的电流密度诱导晶界工程

IF 1.5 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Philosophical Magazine Pub Date : 2023-06-20 DOI:10.1080/14786435.2023.2221043

G. Kumar, Mrinal Phukon, C. Srivastava

{"title":"提高电化学稳定性的电沉积钴涂层的电流密度诱导晶界工程","authors":"G. Kumar, Mrinal Phukon, C. Srivastava","doi":"10.1080/14786435.2023.2221043","DOIUrl":null,"url":null,"abstract":"ABSTRACT Cobalt coatings were electrodeposited at different deposition current densities (10 mA·cm−2, 20 mA·cm−2, 30 mA·cm−2, 40 mA·cm−2, 60 mA·cm−2) over mild steel substrate. The coating deposited at 30 mA·cm−2 showed the highest corrosion resistance (Rp = 7515Ω·cm2) due to a higher fraction of Low energy grain boundary constitution (i.e. coincidence site lattices (CSLs) and low angle grain boundaries (LAGB)) and exhibited higher fraction of stabler Co3O4 passive oxide layer. The coatings electrodeposited at 60 mAcm−2 exhibited lower corrosion resistance (Rp = 1304 Ω·cm2) due to a higher fraction of high-angle grain boundaries and a higher fraction of relatively lesser stable Co(OH)2.","PeriodicalId":19856,"journal":{"name":"Philosophical Magazine","volume":"24 1","pages":"1553 - 1576"},"PeriodicalIF":1.5000,"publicationDate":"2023-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Deposition current density-induced grain boundary engineering of electrodeposited cobalt coatings for enhanced electrochemical stability\",\"authors\":\"G. Kumar, Mrinal Phukon, C. Srivastava\",\"doi\":\"10.1080/14786435.2023.2221043\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"ABSTRACT Cobalt coatings were electrodeposited at different deposition current densities (10 mA·cm−2, 20 mA·cm−2, 30 mA·cm−2, 40 mA·cm−2, 60 mA·cm−2) over mild steel substrate. The coating deposited at 30 mA·cm−2 showed the highest corrosion resistance (Rp = 7515Ω·cm2) due to a higher fraction of Low energy grain boundary constitution (i.e. coincidence site lattices (CSLs) and low angle grain boundaries (LAGB)) and exhibited higher fraction of stabler Co3O4 passive oxide layer. The coatings electrodeposited at 60 mAcm−2 exhibited lower corrosion resistance (Rp = 1304 Ω·cm2) due to a higher fraction of high-angle grain boundaries and a higher fraction of relatively lesser stable Co(OH)2.\",\"PeriodicalId\":19856,\"journal\":{\"name\":\"Philosophical Magazine\",\"volume\":\"24 1\",\"pages\":\"1553 - 1576\"},\"PeriodicalIF\":1.5000,\"publicationDate\":\"2023-06-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Philosophical Magazine\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1080/14786435.2023.2221043\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Philosophical Magazine","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/14786435.2023.2221043","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

以不同的沉积电流密度(10 mA·cm−2、20 mA·cm−2、30 mA·cm−2、40 mA·cm−2、60 mA·cm−2)在低碳钢基体上电沉积钴镀层。在30 mA·cm−2下沉积的涂层由于具有较高比例的低能晶界结构(即重合点阵(csl)和低角度晶界(LAGB))和较高比例的稳定Co3O4被动氧化层，因此具有最高的耐蚀性(Rp = 7515Ω·cm2)。在60 mAcm−2条件下电沉积的镀层由于含有较多的高角度晶界和相对不稳定的Co(OH)2，其耐蚀性较低(Rp = 1304 Ω·cm2)。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Deposition current density-induced grain boundary engineering of electrodeposited cobalt coatings for enhanced electrochemical stability

ABSTRACT Cobalt coatings were electrodeposited at different deposition current densities (10 mA·cm−2, 20 mA·cm−2, 30 mA·cm−2, 40 mA·cm−2, 60 mA·cm−2) over mild steel substrate. The coating deposited at 30 mA·cm−2 showed the highest corrosion resistance (Rp = 7515Ω·cm2) due to a higher fraction of Low energy grain boundary constitution (i.e. coincidence site lattices (CSLs) and low angle grain boundaries (LAGB)) and exhibited higher fraction of stabler Co3O4 passive oxide layer. The coatings electrodeposited at 60 mAcm−2 exhibited lower corrosion resistance (Rp = 1304 Ω·cm2) due to a higher fraction of high-angle grain boundaries and a higher fraction of relatively lesser stable Co(OH)2.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Philosophical Magazine 工程技术-材料科学：综合

自引率

0.00%

发文量

审稿时长

4.7 months

期刊介绍： The Editors of Philosophical Magazine consider for publication contributions describing original experimental and theoretical results, computational simulations and concepts relating to the structure and properties of condensed matter. The submission of papers on novel measurements, phases, phenomena, and new types of material is encouraged.