地铁受电弓碳带非均匀磨损试验研究

IF 1.6 3区工程技术 Q3 ENGINEERING, MECHANICAL

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Pub Date : 2023-08-07 DOI:10.1177/13506501231193068

Xu Luo, Cheng Cai, Hong S. Yang, G. Mei, Chang Gao, Weiping Liu, Dongsheng Yang

{"title":"地铁受电弓碳带非均匀磨损试验研究","authors":"Xu Luo, Cheng Cai, Hong S. Yang, G. Mei, Chang Gao, Weiping Liu, Dongsheng Yang","doi":"10.1177/13506501231193068","DOIUrl":null,"url":null,"abstract":"The present study simulated the actual contact conditions between the catenary and pantograph of a metro line using high-speed ring block current that carried friction and wear testers, from which the uneven wear of the pantograph carbon strip under different working conditions was studied. The results show that the arc power, friction coefficient, and wear amount will change correspondingly with increasing current and normal load. Additionally, all carbon strips showed non-uniform wear after the test, and the edge erosion and wear depth of the carbon strip perpendicular to the moving direction were higher than those in the middle part. The ablation of the back end of the carbon strip running with the catenary was higher than that of the front end.","PeriodicalId":20570,"journal":{"name":"Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2023-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental research on the non-uniform wear of the carbon strip of the metro pantograph\",\"authors\":\"Xu Luo, Cheng Cai, Hong S. Yang, G. Mei, Chang Gao, Weiping Liu, Dongsheng Yang\",\"doi\":\"10.1177/13506501231193068\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The present study simulated the actual contact conditions between the catenary and pantograph of a metro line using high-speed ring block current that carried friction and wear testers, from which the uneven wear of the pantograph carbon strip under different working conditions was studied. The results show that the arc power, friction coefficient, and wear amount will change correspondingly with increasing current and normal load. Additionally, all carbon strips showed non-uniform wear after the test, and the edge erosion and wear depth of the carbon strip perpendicular to the moving direction were higher than those in the middle part. The ablation of the back end of the carbon strip running with the catenary was higher than that of the front end.\",\"PeriodicalId\":20570,\"journal\":{\"name\":\"Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2023-08-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1177/13506501231193068\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/13506501231193068","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 0

摘要

本研究采用高速环块电流承载摩擦磨损试验机，模拟地铁线路接触网与受电弓的实际接触情况，研究受电弓碳带在不同工况下的不均匀磨损。结果表明，电弧功率、摩擦系数和磨损量随电流和正常负载的增大而发生相应的变化。此外，试验后所有碳带均表现出不均匀磨损，且垂直于运动方向的碳带边缘侵蚀和磨损深度均高于中间部分。随接触网运行的碳带后端烧蚀率高于前端烧蚀率。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Experimental research on the non-uniform wear of the carbon strip of the metro pantograph

The present study simulated the actual contact conditions between the catenary and pantograph of a metro line using high-speed ring block current that carried friction and wear testers, from which the uneven wear of the pantograph carbon strip under different working conditions was studied. The results show that the arc power, friction coefficient, and wear amount will change correspondingly with increasing current and normal load. Additionally, all carbon strips showed non-uniform wear after the test, and the edge erosion and wear depth of the carbon strip perpendicular to the moving direction were higher than those in the middle part. The ablation of the back end of the carbon strip running with the catenary was higher than that of the front end.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 工程技术-工程：机械

CiteScore

4.20

自引率

5.00%

发文量

110

审稿时长

6.1 months

期刊介绍： The Journal of Engineering Tribology publishes high-quality, peer-reviewed papers from academia and industry worldwide on the engineering science associated with tribology and its applications. "I am proud to say that I have been part of the tribology research community for almost 20 years. That community has always seemed to me to be highly active, progressive, and closely knit. The conferences are well attended and are characterised by a warmth and friendliness that transcends national boundaries. I see Part J as being an important part of that community, giving us an outlet to publish and promote our scholarly activities. I very much look forward to my term of office as editor of your Journal. I hope you will continue to submit papers, help out with reviewing, and most importantly to read and talk about the work you will find there." Professor Rob Dwyer-Joyce, Sheffield University, UK This journal is a member of the Committee on Publication Ethics (COPE).