初榨橄榄油加工过程中泵送对溶解氧的贡献

Q3 Chemical Engineering
P. Masella, G. Angeloni, L. Guerrini, A. Spadi, Ferdinando Corti, A. Parenti
{"title":"初榨橄榄油加工过程中泵送对溶解氧的贡献","authors":"P. Masella, G. Angeloni, L. Guerrini, A. Spadi, Ferdinando Corti, A. Parenti","doi":"10.3303/CET2187052","DOIUrl":null,"url":null,"abstract":"The overall quality of extra virgin olive oil (EVOO) strictly relates to the evolution of its oxidative state, which in turn depends on the amount of the oxygen availability during the product life, starting with the olive fruit milling. The issue of oil oxygenation during processing has been poorly studied. The few available literature assesses the relative contribution of three main processing steps (paste malaxation, decanter centrifugation, and vertical centrifugation) to the final dissolved oxygen concentration and the consequences on the oil quality decay during storage. Nevertheless, until now information about the contribution of the devices used to moves materials during processing, i.e. screw conveyor and pumps to move olive, olive paste and oil, to the amount of dissolved oxygen and in broader terms on the oil quality, are lacking. It can be reasonably assumed that the intact drupes handling during leaf-removal and washing before crushing, had a negligible effect on the final oil dissolved oxygen content, whereas from crusher to the decanter centrifuge by the malaxer, where olive paste handling occurs, a noticeable effect on the future oil characteristics could occur. The standard and widespread device used to move olive paste during processing, essentially from the crusher to the malaxer and from the malaxer to the decanter centrifuge, is the progressive cavity pump, commonly named mono-pump. Notices of other pumping devices used or proved in EVOO mills are missing. In the present work a peristaltic pump (roller pump) has been tested in comparison to the conventional mono-pump in a continuous centrifugal extraction plant. Specifically, the two pumps were alternatively used to feed the decanter centrifuge by empting the malaxation chambers. The oxygenation effect was assessed in terms of dissolved oxygen amount (DOA) in the produced EVOO, which were also compared for the main qualitative traits such as commercial parameters, phenolic and volatile profiles and phthalates occurrence being the peristaltic pump equipped with a phthalates-free tube. Basically, the qualitative effect of the two pumps significantly differs for the DOA with about 10% saving for the peristaltic pump. The latter also gives significantly (p","PeriodicalId":9695,"journal":{"name":"Chemical engineering transactions","volume":"2 1","pages":"307-312"},"PeriodicalIF":0.0000,"publicationDate":"2021-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Pumping Contribution to Dissolved Oxygen in Virgin Olive Oil During Processing\",\"authors\":\"P. Masella, G. Angeloni, L. Guerrini, A. Spadi, Ferdinando Corti, A. Parenti\",\"doi\":\"10.3303/CET2187052\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The overall quality of extra virgin olive oil (EVOO) strictly relates to the evolution of its oxidative state, which in turn depends on the amount of the oxygen availability during the product life, starting with the olive fruit milling. The issue of oil oxygenation during processing has been poorly studied. The few available literature assesses the relative contribution of three main processing steps (paste malaxation, decanter centrifugation, and vertical centrifugation) to the final dissolved oxygen concentration and the consequences on the oil quality decay during storage. Nevertheless, until now information about the contribution of the devices used to moves materials during processing, i.e. screw conveyor and pumps to move olive, olive paste and oil, to the amount of dissolved oxygen and in broader terms on the oil quality, are lacking. It can be reasonably assumed that the intact drupes handling during leaf-removal and washing before crushing, had a negligible effect on the final oil dissolved oxygen content, whereas from crusher to the decanter centrifuge by the malaxer, where olive paste handling occurs, a noticeable effect on the future oil characteristics could occur. The standard and widespread device used to move olive paste during processing, essentially from the crusher to the malaxer and from the malaxer to the decanter centrifuge, is the progressive cavity pump, commonly named mono-pump. Notices of other pumping devices used or proved in EVOO mills are missing. In the present work a peristaltic pump (roller pump) has been tested in comparison to the conventional mono-pump in a continuous centrifugal extraction plant. Specifically, the two pumps were alternatively used to feed the decanter centrifuge by empting the malaxation chambers. The oxygenation effect was assessed in terms of dissolved oxygen amount (DOA) in the produced EVOO, which were also compared for the main qualitative traits such as commercial parameters, phenolic and volatile profiles and phthalates occurrence being the peristaltic pump equipped with a phthalates-free tube. Basically, the qualitative effect of the two pumps significantly differs for the DOA with about 10% saving for the peristaltic pump. The latter also gives significantly (p\",\"PeriodicalId\":9695,\"journal\":{\"name\":\"Chemical engineering transactions\",\"volume\":\"2 1\",\"pages\":\"307-312\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Chemical engineering transactions\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3303/CET2187052\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Chemical Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical engineering transactions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3303/CET2187052","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Chemical Engineering","Score":null,"Total":0}
引用次数: 2

摘要

特级初榨橄榄油(EVOO)的整体质量与其氧化状态的演变密切相关,而氧化状态的演变又取决于产品生命周期中从橄榄果碾磨开始的可用氧量。石油加工过程中的氧化问题研究较少。少数可用的文献评估了三个主要处理步骤(膏体软化、卧螺离心机和垂直离心机)对最终溶解氧浓度的相对贡献以及储存过程中油质衰减的后果。然而,到目前为止,关于在加工过程中用于移动材料的设备,即螺旋输送机和移动橄榄、橄榄膏和油的泵,对溶解氧的量和更广泛意义上的油质的贡献的资料仍然缺乏。可以合理地假设,在去叶和破碎前洗涤过程中,完整的核果处理对最终的油溶解氧含量的影响可以忽略不计,而从破碎机到压榨机的滗析离心机,在处理橄榄酱的过程中,对未来的油特性可能会产生明显的影响。在加工过程中,用于移动橄榄酱的标准和广泛的设备,基本上是从破碎机到软化机,从软化机到卧螺离心机,是渐进腔泵,通常称为单泵。缺少EVOO工厂使用或证明的其他泵送设备的通知。本文在连续离心抽提装置中对蠕动泵(滚柱泵)与常规单泵进行了对比试验。具体地说,这两个泵被交替地用来通过清空松弛室来给卧螺离心机供油。用溶解氧量(DOA)评价了氧化效果,并比较了配备无邻苯二甲酸酯管的蠕动泵的主要定性特征,如商业参数、酚类和挥发性分布以及邻苯二甲酸酯的出现。基本上,两种泵对DOA的定性效果有显著差异,蠕动泵可节省约10%。后者也给出了显著的(p
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Pumping Contribution to Dissolved Oxygen in Virgin Olive Oil During Processing
The overall quality of extra virgin olive oil (EVOO) strictly relates to the evolution of its oxidative state, which in turn depends on the amount of the oxygen availability during the product life, starting with the olive fruit milling. The issue of oil oxygenation during processing has been poorly studied. The few available literature assesses the relative contribution of three main processing steps (paste malaxation, decanter centrifugation, and vertical centrifugation) to the final dissolved oxygen concentration and the consequences on the oil quality decay during storage. Nevertheless, until now information about the contribution of the devices used to moves materials during processing, i.e. screw conveyor and pumps to move olive, olive paste and oil, to the amount of dissolved oxygen and in broader terms on the oil quality, are lacking. It can be reasonably assumed that the intact drupes handling during leaf-removal and washing before crushing, had a negligible effect on the final oil dissolved oxygen content, whereas from crusher to the decanter centrifuge by the malaxer, where olive paste handling occurs, a noticeable effect on the future oil characteristics could occur. The standard and widespread device used to move olive paste during processing, essentially from the crusher to the malaxer and from the malaxer to the decanter centrifuge, is the progressive cavity pump, commonly named mono-pump. Notices of other pumping devices used or proved in EVOO mills are missing. In the present work a peristaltic pump (roller pump) has been tested in comparison to the conventional mono-pump in a continuous centrifugal extraction plant. Specifically, the two pumps were alternatively used to feed the decanter centrifuge by empting the malaxation chambers. The oxygenation effect was assessed in terms of dissolved oxygen amount (DOA) in the produced EVOO, which were also compared for the main qualitative traits such as commercial parameters, phenolic and volatile profiles and phthalates occurrence being the peristaltic pump equipped with a phthalates-free tube. Basically, the qualitative effect of the two pumps significantly differs for the DOA with about 10% saving for the peristaltic pump. The latter also gives significantly (p
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Chemical engineering transactions
Chemical engineering transactions Chemical Engineering-Chemical Engineering (all)
CiteScore
1.40
自引率
0.00%
发文量
0
审稿时长
6 weeks
期刊介绍: Chemical Engineering Transactions (CET) aims to be a leading international journal for publication of original research and review articles in chemical, process, and environmental engineering. CET begin in 2002 as a vehicle for publication of high-quality papers in chemical engineering, connected with leading international conferences. In 2014, CET opened a new era as an internationally-recognised journal. Articles containing original research results, covering any aspect from molecular phenomena through to industrial case studies and design, with a strong influence of chemical engineering methodologies and ethos are particularly welcome. We encourage state-of-the-art contributions relating to the future of industrial processing, sustainable design, as well as transdisciplinary research that goes beyond the conventional bounds of chemical engineering. Short reviews on hot topics, emerging technologies, and other areas of high interest should highlight unsolved challenges and provide clear directions for future research. The journal publishes periodically with approximately 6 volumes per year. Core topic areas: -Batch processing- Biotechnology- Circular economy and integration- Environmental engineering- Fluid flow and fluid mechanics- Green materials and processing- Heat and mass transfer- Innovation engineering- Life cycle analysis and optimisation- Modelling and simulation- Operations and supply chain management- Particle technology- Process dynamics, flexibility, and control- Process integration and design- Process intensification and optimisation- Process safety- Product development- Reaction engineering- Renewable energy- Separation processes- Smart industry, city, and agriculture- Sustainability- Systems engineering- Thermodynamic- Waste minimisation, processing and management- Water and wastewater engineering
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信