铁氧体负载同轴线路中高压脉冲的亚纳秒级上升时间

O. Kovalchuk, V. O. Kutenkov, I. Romanchenko, V. Rostov
{"title":"铁氧体负载同轴线路中高压脉冲的亚纳秒级上升时间","authors":"O. Kovalchuk, V. O. Kutenkov, I. Romanchenko, V. Rostov","doi":"10.1109/PLASMA.2008.4591189","DOIUrl":null,"url":null,"abstract":"In this paper, Ni-Zn ferrite loaded coaxial line, using oil as insulation, with subnanosecond rise time at the input pulse voltage up to 360 kV into a 50 load is described. The dependence of the shock front development on the line length and pulse voltage was investigated. The experimental data were compared with analytical predictions of early theory. The experimental and expected results are shown to be in quite good agreement. A modified ferrite-loaded line with lower impedance was fabricated in order to increase its magnetic field. The ferrite loaded line showed stable work at pulse repetition frequency of 100 Hz and the shortest rise time of 0.7 ns has been achieved. Benson et al have proposed to use an axial magnetic field bias for further pulse sharpening. Magnetic bias conditions for the optimal pulse sharpening were tested.","PeriodicalId":6359,"journal":{"name":"2008 IEEE 35th International Conference on Plasma Science","volume":"14 18 1","pages":"1-1"},"PeriodicalIF":0.0000,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Subnanosecond rise time of high voltage pulses in ferrite loaded coaxial line\",\"authors\":\"O. Kovalchuk, V. O. Kutenkov, I. Romanchenko, V. Rostov\",\"doi\":\"10.1109/PLASMA.2008.4591189\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, Ni-Zn ferrite loaded coaxial line, using oil as insulation, with subnanosecond rise time at the input pulse voltage up to 360 kV into a 50 load is described. The dependence of the shock front development on the line length and pulse voltage was investigated. The experimental data were compared with analytical predictions of early theory. The experimental and expected results are shown to be in quite good agreement. A modified ferrite-loaded line with lower impedance was fabricated in order to increase its magnetic field. The ferrite loaded line showed stable work at pulse repetition frequency of 100 Hz and the shortest rise time of 0.7 ns has been achieved. Benson et al have proposed to use an axial magnetic field bias for further pulse sharpening. Magnetic bias conditions for the optimal pulse sharpening were tested.\",\"PeriodicalId\":6359,\"journal\":{\"name\":\"2008 IEEE 35th International Conference on Plasma Science\",\"volume\":\"14 18 1\",\"pages\":\"1-1\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-06-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 IEEE 35th International Conference on Plasma Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/PLASMA.2008.4591189\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE 35th International Conference on Plasma Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PLASMA.2008.4591189","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

本文介绍了一种以油为绝缘材料的镍锌铁氧体负载同轴线路,该线路在输入脉冲电压高达360 kV时上升时间达亚纳秒。研究了激波前沿发展与线长和脉冲电压的关系。实验数据与早期理论的分析预测进行了比较。实验结果与预期结果吻合较好。为了提高铁氧体负载线的磁场强度,制备了一种具有较低阻抗的改性铁氧体负载线。铁氧体负载线在脉冲重复频率为100 Hz时工作稳定,上升时间最短为0.7 ns。Benson等人提出使用轴向磁场偏置进一步的脉冲锐化。测试了最佳脉冲锐化的偏磁条件。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Subnanosecond rise time of high voltage pulses in ferrite loaded coaxial line
In this paper, Ni-Zn ferrite loaded coaxial line, using oil as insulation, with subnanosecond rise time at the input pulse voltage up to 360 kV into a 50 load is described. The dependence of the shock front development on the line length and pulse voltage was investigated. The experimental data were compared with analytical predictions of early theory. The experimental and expected results are shown to be in quite good agreement. A modified ferrite-loaded line with lower impedance was fabricated in order to increase its magnetic field. The ferrite loaded line showed stable work at pulse repetition frequency of 100 Hz and the shortest rise time of 0.7 ns has been achieved. Benson et al have proposed to use an axial magnetic field bias for further pulse sharpening. Magnetic bias conditions for the optimal pulse sharpening were tested.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信