{"title":"n沟道单层黑磷纳米带晶体管的直流和射频性能","authors":"K. Alam","doi":"10.37256/jeee.2120232835","DOIUrl":null,"url":null,"abstract":"Two-dimensional black phosphorus is a relatively new discovery. There are numerous studies on black phosphorus two-dimensional transistors that focus on analog and RF performance. However, the RF performance of black phosphorus nanoribbon transistors is yet to be explored. We use a four-band tight binding Hamiltonian in conjunction with a non-equilibrium Green's function quantum transport simulator to investigate both the DC and RF performance of a monolayer black phosphorus nanoribbon transistor. We found that electron intra-band tunneling is responsible for current flow in the off-state, while in the on-state, the electrons flow over the top of the channel barrier potential. With a VDD of 0.4 volt and a gate length of 5 nm, our black phosphorus nanoribbon transistor has DC performance metrics of 510 µA/µm on-state current, 105 on/off current ratio, and 65 mV/dec inverse subthreshold slope. The device's RF performance characteristics are as follows: cut-off (unity current gain) frequency of 772.84 GHz, maximum oscillation (unity power gain) frequency of 1.15 THz, and open circuit voltage gain of 26.7 dB with transistor operating in the on-state. The RF performance of the device is found to be significantly impacted by the source and drain contact resistances. With source and drain resistances set to zero, the cut-off frequency increases to 995.23 GHz and the unity power gain frequency increases to 4.16 THz. The device shows unconditional stability above 893 GHz and it is conditionally stable below this frequency. ","PeriodicalId":39047,"journal":{"name":"Journal of Electrical and Electronics Engineering","volume":"9 4 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"DC and RF Performance of an N-channel Monolayer Black Phosphorus Nanoribbon Transistor\",\"authors\":\"K. Alam\",\"doi\":\"10.37256/jeee.2120232835\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Two-dimensional black phosphorus is a relatively new discovery. There are numerous studies on black phosphorus two-dimensional transistors that focus on analog and RF performance. However, the RF performance of black phosphorus nanoribbon transistors is yet to be explored. We use a four-band tight binding Hamiltonian in conjunction with a non-equilibrium Green's function quantum transport simulator to investigate both the DC and RF performance of a monolayer black phosphorus nanoribbon transistor. We found that electron intra-band tunneling is responsible for current flow in the off-state, while in the on-state, the electrons flow over the top of the channel barrier potential. With a VDD of 0.4 volt and a gate length of 5 nm, our black phosphorus nanoribbon transistor has DC performance metrics of 510 µA/µm on-state current, 105 on/off current ratio, and 65 mV/dec inverse subthreshold slope. The device's RF performance characteristics are as follows: cut-off (unity current gain) frequency of 772.84 GHz, maximum oscillation (unity power gain) frequency of 1.15 THz, and open circuit voltage gain of 26.7 dB with transistor operating in the on-state. The RF performance of the device is found to be significantly impacted by the source and drain contact resistances. With source and drain resistances set to zero, the cut-off frequency increases to 995.23 GHz and the unity power gain frequency increases to 4.16 THz. The device shows unconditional stability above 893 GHz and it is conditionally stable below this frequency. \",\"PeriodicalId\":39047,\"journal\":{\"name\":\"Journal of Electrical and Electronics Engineering\",\"volume\":\"9 4 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-06-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Electrical and Electronics Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.37256/jeee.2120232835\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Electrical and Electronics Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37256/jeee.2120232835","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
DC and RF Performance of an N-channel Monolayer Black Phosphorus Nanoribbon Transistor
Two-dimensional black phosphorus is a relatively new discovery. There are numerous studies on black phosphorus two-dimensional transistors that focus on analog and RF performance. However, the RF performance of black phosphorus nanoribbon transistors is yet to be explored. We use a four-band tight binding Hamiltonian in conjunction with a non-equilibrium Green's function quantum transport simulator to investigate both the DC and RF performance of a monolayer black phosphorus nanoribbon transistor. We found that electron intra-band tunneling is responsible for current flow in the off-state, while in the on-state, the electrons flow over the top of the channel barrier potential. With a VDD of 0.4 volt and a gate length of 5 nm, our black phosphorus nanoribbon transistor has DC performance metrics of 510 µA/µm on-state current, 105 on/off current ratio, and 65 mV/dec inverse subthreshold slope. The device's RF performance characteristics are as follows: cut-off (unity current gain) frequency of 772.84 GHz, maximum oscillation (unity power gain) frequency of 1.15 THz, and open circuit voltage gain of 26.7 dB with transistor operating in the on-state. The RF performance of the device is found to be significantly impacted by the source and drain contact resistances. With source and drain resistances set to zero, the cut-off frequency increases to 995.23 GHz and the unity power gain frequency increases to 4.16 THz. The device shows unconditional stability above 893 GHz and it is conditionally stable below this frequency.
期刊介绍:
Journal of Electrical and Electronics Engineering is a scientific interdisciplinary, application-oriented publication that offer to the researchers and to the PhD students the possibility to disseminate their novel and original scientific and research contributions in the field of electrical and electronics engineering. The articles are reviewed by professionals and the selection of the papers is based only on the quality of their content and following the next criteria: the papers presents the research results of the authors, the papers / the content of the papers have not been submitted or published elsewhere, the paper must be written in English, as well as the fact that the papers should include in the reference list papers already published in recent years in the Journal of Electrical and Electronics Engineering that present similar research results. The topics and instructions for authors of this journal can be found to the appropiate sections.