氧化铝和石墨烯对Al-7075复合材料力学和摩擦学性能的影响

Q4 Engineering
P. Harish, Syed. Siddiq, V. M. Srikanth, S. Reddy, K. Kumar
{"title":"氧化铝和石墨烯对Al-7075复合材料力学和摩擦学性能的影响","authors":"P. Harish, Syed. Siddiq, V. M. Srikanth, S. Reddy, K. Kumar","doi":"10.18485/aeletters.2019.4.3.1","DOIUrl":null,"url":null,"abstract":": In this paper the combined effect of alumina and graphene reinforced with aluminum matrix by using stir casting methodology, was evaluated. Hybrid metal matrix composites gives combined results effect of different reinforced aspects when combined with ductile matrix appearance. Both alumina and graphene we are varied by the weight proportions in order to 1%, 2% and 3% respectively. With increase in the weight percentage the mechanical properties like hardness were increased. Density was reduced. The detailed microstructure evaluation shows the mixing of reinforcement in the matrix. The tribological behaviour of hybrid composite was determined. The graphene agglomeration in the composite increased the hardness by 35% as compared to the base material. The composite reinforced with 3% alumina + 3% graphene recorded highest hardness .","PeriodicalId":53430,"journal":{"name":"Applied Engineering Letters","volume":"20 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Effect of Alumina and Graphene on Mechanical and Tribological Behaviour of Al-7075 Hybrid Composite\",\"authors\":\"P. Harish, Syed. Siddiq, V. M. Srikanth, S. Reddy, K. Kumar\",\"doi\":\"10.18485/aeletters.2019.4.3.1\",\"DOIUrl\":null,\"url\":null,\"abstract\":\": In this paper the combined effect of alumina and graphene reinforced with aluminum matrix by using stir casting methodology, was evaluated. Hybrid metal matrix composites gives combined results effect of different reinforced aspects when combined with ductile matrix appearance. Both alumina and graphene we are varied by the weight proportions in order to 1%, 2% and 3% respectively. With increase in the weight percentage the mechanical properties like hardness were increased. Density was reduced. The detailed microstructure evaluation shows the mixing of reinforcement in the matrix. The tribological behaviour of hybrid composite was determined. The graphene agglomeration in the composite increased the hardness by 35% as compared to the base material. The composite reinforced with 3% alumina + 3% graphene recorded highest hardness .\",\"PeriodicalId\":53430,\"journal\":{\"name\":\"Applied Engineering Letters\",\"volume\":\"20 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Engineering Letters\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.18485/aeletters.2019.4.3.1\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Engineering Letters","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.18485/aeletters.2019.4.3.1","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 1

摘要

采用搅拌铸造的方法对铝基增强氧化铝和石墨烯的复合效果进行了评价。混杂金属基复合材料在与韧性基体相结合时,具有不同增强方面的综合效果。氧化铝和石墨烯的重量比例不同,分别为1%,2%和3%。随着重量百分比的增加,硬度等力学性能得到提高。密度降低了。详细的微观组织评价表明,增强在基体中混合。测定了复合材料的摩擦学性能。与基材相比,复合材料中的石墨烯团聚使硬度提高了35%。以3%氧化铝+ 3%石墨烯增强的复合材料硬度最高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of Alumina and Graphene on Mechanical and Tribological Behaviour of Al-7075 Hybrid Composite
: In this paper the combined effect of alumina and graphene reinforced with aluminum matrix by using stir casting methodology, was evaluated. Hybrid metal matrix composites gives combined results effect of different reinforced aspects when combined with ductile matrix appearance. Both alumina and graphene we are varied by the weight proportions in order to 1%, 2% and 3% respectively. With increase in the weight percentage the mechanical properties like hardness were increased. Density was reduced. The detailed microstructure evaluation shows the mixing of reinforcement in the matrix. The tribological behaviour of hybrid composite was determined. The graphene agglomeration in the composite increased the hardness by 35% as compared to the base material. The composite reinforced with 3% alumina + 3% graphene recorded highest hardness .
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Applied Engineering Letters
Applied Engineering Letters Energy-Energy (all)
CiteScore
1.60
自引率
0.00%
发文量
5
审稿时长
7 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信