Steady-State Liquid Permeability Measurements in Samples from the Bakken Formation, Williston Basin, USA

We measured steady-state liquid (dodecane) permeability in four horizontal core plugs from the middle member of the Bakken Formation at multiple effective stress conditions to investigate how permeability evolves with confining stress and to infer the matrix permeability. Three of the four tested samples behaved almost perfectly elastically as the hysteresis effect was negligible. In contrast, the fourth sample showed a permeability decrease of ~40% at the end of the test program. Our interpretation is that the closure of open artificial micro-fractures initially present in the sample (based on micro-CT imaging) caused that permeability hysteresis. The matrix permeability to dodecane (oil) of the tested samples is between ~50 nD and ~520 nD at the confining pressure of 9500 psi. The 520 nD sample exhibited the lowest porosity, the highest calcite content, and the largest dominant pore throat radii. In contrast, the 50 nD sample was more porous, and exhibited the highest dolomite content and the smallest dominant pore throat radii. This study shows that our multi-stress testing protocol allows the study of the permeability hysteresis effect to interpret the matrix permeability. We also document the presence of middle Bakken lithologies with permeabilities up to one order of magnitude greater than others. These permeable lithologies may have a significant contribution to well production rates.