Computer Hardware and Network Data Transmission based on Internet of Things Communication Technology

In order to meet the requirements of computer hardware and network data transmission security, a research based on Internet of Things communication technology is proposed. The main content of this research is the research based on the communication technology of the Internet of Things, through the description of the communication protocol of the Internet of Things, the system hardware design and implementation methods are used, and finally the research method based on the communication technology of the Internet of Things is constructed through experiments and analysis. The core technologies of 5G connectivity are being used to construct the IOT. As a result, the IOT might gain momentum. The experimental findings demonstrate that the delays are all within 200 Ms. When the message size is short (within 1KB), the transmission of diverse hardware is average, and the transmission quality standards of QoS1 are fulfilled. The transmission quality standards of QoS1 can match the communication reliability and security needs of the Internet of Things. This article evaluates the performance of data transfers with lengths of 20 byte, 30 byte, 50 byte, and 70 byte, respectively. This paper evaluates the efficiency of Wi-Fi access configuration by sending data packets of varying sizes i.e., 10 bytes, 30 bytes, 50 bytes, and 70 bytes over a distribution network. The results show that, on average, the network takes 0.6692s, 1.3546s, 2.8600s, and 4.7319s to deliver each packet, with success rates of 100% in each case. The system's increased network distribution efficiency is observed from the experimentation. The research based on the Internet of Things communication technology can meet the needs of computer hardware and network data transmission security.