定向凝固拉速对Mg-Ag-Zn合金导热系数的影响

IF 0.6 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY
Ma Yanxiang , Li Qiushu , Wang Xudong
{"title":"定向凝固拉速对Mg-Ag-Zn合金导热系数的影响","authors":"Ma Yanxiang ,&nbsp;Li Qiushu ,&nbsp;Wang Xudong","doi":"10.1016/S1875-5372(18)30192-9","DOIUrl":null,"url":null,"abstract":"<div><p>Specimens of as-cast Mg-1Ag-Zn, Mg-3Ag-Zn and Mg-5Ag-Zn alloys were fabricated, and then the specimens' thermal conductivity was calculated. With the increase of Ag content, the thermal conductivity of as-cast alloys decreases significantly. After that, directionally solidified specimens of the above mentioned as-cast Mg-Ag-Zn alloys were made at three different pulling velocities: <em>V</em>=25 μm/s, <em>V</em>=50 μm/s, <em>V</em>=75 μm/s, and then their thermal conductivity was calculated again. The results show that with the increase of the pulling velocity, the thermal conductivity of alloys decreases significantly. Variations in the solute content and the pulling velocities are believed to play important roles in the thermal conductivity of Mg-Ag-Zn alloys. Since these two factors can strengthen the electron's scattering process, reduce their free path, and thereby reduce the alloys' thermal conductivity.</p></div>","PeriodicalId":21056,"journal":{"name":"稀有金属材料与工程","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S1875-5372(18)30192-9","citationCount":"0","resultStr":"{\"title\":\"Effect of the Pulling Velocity of Directional Solidification on Thermal Conductivity of Mg-Ag-Zn Alloys\",\"authors\":\"Ma Yanxiang ,&nbsp;Li Qiushu ,&nbsp;Wang Xudong\",\"doi\":\"10.1016/S1875-5372(18)30192-9\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Specimens of as-cast Mg-1Ag-Zn, Mg-3Ag-Zn and Mg-5Ag-Zn alloys were fabricated, and then the specimens' thermal conductivity was calculated. With the increase of Ag content, the thermal conductivity of as-cast alloys decreases significantly. After that, directionally solidified specimens of the above mentioned as-cast Mg-Ag-Zn alloys were made at three different pulling velocities: <em>V</em>=25 μm/s, <em>V</em>=50 μm/s, <em>V</em>=75 μm/s, and then their thermal conductivity was calculated again. The results show that with the increase of the pulling velocity, the thermal conductivity of alloys decreases significantly. Variations in the solute content and the pulling velocities are believed to play important roles in the thermal conductivity of Mg-Ag-Zn alloys. Since these two factors can strengthen the electron's scattering process, reduce their free path, and thereby reduce the alloys' thermal conductivity.</p></div>\",\"PeriodicalId\":21056,\"journal\":{\"name\":\"稀有金属材料与工程\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2018-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1016/S1875-5372(18)30192-9\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"稀有金属材料与工程\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1875537218301929\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"稀有金属材料与工程","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1875537218301929","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

制备了铸态Mg-1Ag-Zn、Mg-3Ag-Zn和Mg-5Ag-Zn合金试样,计算了试样的导热系数。随着Ag含量的增加,铸态合金的导热系数显著降低。然后,在V=25 μm/s、V=50 μm/s、V=75 μm/s三种不同的拉伸速度下,制备上述铸态Mg-Ag-Zn合金定向凝固试样,并再次计算其导热系数。结果表明:随着拉拔速度的增大,合金的导热系数显著降低;溶质含量和拉拔速度的变化对Mg-Ag-Zn合金的导热性能有重要影响。由于这两个因素可以增强电子的散射过程,减少电子的自由程,从而降低合金的导热性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of the Pulling Velocity of Directional Solidification on Thermal Conductivity of Mg-Ag-Zn Alloys

Specimens of as-cast Mg-1Ag-Zn, Mg-3Ag-Zn and Mg-5Ag-Zn alloys were fabricated, and then the specimens' thermal conductivity was calculated. With the increase of Ag content, the thermal conductivity of as-cast alloys decreases significantly. After that, directionally solidified specimens of the above mentioned as-cast Mg-Ag-Zn alloys were made at three different pulling velocities: V=25 μm/s, V=50 μm/s, V=75 μm/s, and then their thermal conductivity was calculated again. The results show that with the increase of the pulling velocity, the thermal conductivity of alloys decreases significantly. Variations in the solute content and the pulling velocities are believed to play important roles in the thermal conductivity of Mg-Ag-Zn alloys. Since these two factors can strengthen the electron's scattering process, reduce their free path, and thereby reduce the alloys' thermal conductivity.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
稀有金属材料与工程
稀有金属材料与工程 工程技术-材料科学:综合
CiteScore
1.30
自引率
57.10%
发文量
17973
审稿时长
4.2 months
期刊介绍:
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信