磨料水射流和光子束(激光)切割后X5CrNi18-10钢表面织体分析

JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering Pub Date : 2021-04-20 DOI:10.30464/JMEE.2020.4.4.365

M. Romanowski, K. Nadolny

{"title":"磨料水射流和光子束(激光)切割后X5CrNi18-10钢表面织体分析","authors":"M. Romanowski, K. Nadolny","doi":"10.30464/JMEE.2020.4.4.365","DOIUrl":null,"url":null,"abstract":"The article presents an analysis of the geometric structure of the surface of X5CrNi18‑10 steel sheet after cutting with a abrasive water-jet (AWJ) and a photon beam (laser). Both methods and the workpiece material were also described. Using the laser triangulation method, the cut surface texture was measured by opto-digital microscopy. Additionally, microscopic images of the cut surface were made using the Dino-Lite Edge AM7915MZT microscope by ANMO Electronics Co. The analysis of changes in the value of the Sa parameter for the surface after laser cutting and abrasive water-jet showed that the thickness of the cut material has the most significant influence on the obtained measurement results.","PeriodicalId":32811,"journal":{"name":"JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering","volume":"2 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-04-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Surface texture analysis of the X5CrNi18-10 steel after cutting with abrasive water jet and photon beam (laser)\",\"authors\":\"M. Romanowski, K. Nadolny\",\"doi\":\"10.30464/JMEE.2020.4.4.365\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The article presents an analysis of the geometric structure of the surface of X5CrNi18‑10 steel sheet after cutting with a abrasive water-jet (AWJ) and a photon beam (laser). Both methods and the workpiece material were also described. Using the laser triangulation method, the cut surface texture was measured by opto-digital microscopy. Additionally, microscopic images of the cut surface were made using the Dino-Lite Edge AM7915MZT microscope by ANMO Electronics Co. The analysis of changes in the value of the Sa parameter for the surface after laser cutting and abrasive water-jet showed that the thickness of the cut material has the most significant influence on the obtained measurement results.\",\"PeriodicalId\":32811,\"journal\":{\"name\":\"JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering\",\"volume\":\"2 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-04-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.30464/JMEE.2020.4.4.365\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30464/JMEE.2020.4.4.365","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

本文对X5CrNi18‑10钢板在磨料水射流(AWJ)和光子束(激光)切割后的表面几何结构进行了分析。介绍了两种方法和工件材料。采用激光三角剖分法，利用光学数字显微镜对切割表面的纹理进行了测量。此外，使用ANMO Electronics Co.的Dino-Lite Edge AM7915MZT显微镜对切割表面进行显微成像。分析激光切割和磨料水射流后表面Sa参数值的变化，发现被切割材料的厚度对得到的测量结果影响最为显著。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Surface texture analysis of the X5CrNi18-10 steel after cutting with abrasive water jet and photon beam (laser)

The article presents an analysis of the geometric structure of the surface of X5CrNi18‑10 steel sheet after cutting with a abrasive water-jet (AWJ) and a photon beam (laser). Both methods and the workpiece material were also described. Using the laser triangulation method, the cut surface texture was measured by opto-digital microscopy. Additionally, microscopic images of the cut surface were made using the Dino-Lite Edge AM7915MZT microscope by ANMO Electronics Co. The analysis of changes in the value of the Sa parameter for the surface after laser cutting and abrasive water-jet showed that the thickness of the cut material has the most significant influence on the obtained measurement results.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

JEMMME Journal of Energy Mechanical Material and Manufacturing Engineering

自引率

0.00%

发文量

审稿时长

8 weeks