Selective Crystallization - En Route to In-Situ Deep Conformance Control

We have investigated the interfacial properties at a brine-hydrocarbon boundary with the prospect of understanding the crystallization process that takes place when certain electrolytes are present in the brine and when certain surfactants are present in the hydrocarbon phase. This was done in an optical force tensiometer setup with a so-called buoyant droplet configuration. It is only specific combinations (that is not all surfactants not all electrolytes) that form crystals and we aim at utilizing this specificity to form crystal plugs in particular sections of an oil reservoir, for example in zones with high flow that can then be reduced by the crystal plugs. The treatment can potentially be tailored based on the predominant acid-type in a mixture. The current study reveals several (at least three) different modes of crystal formation. The electrolyte-surfactant combination that gives rise to the most clear-cut formation of crystals directly at the interface is involving Zn2+ or Cu2+ and dodecanoic acid (C11H23COOH). Several of the systems under study appears to be forming crystals within the hydrocarbon phase and that these crystals more the likely are a result of the surfactant associated diffusive transfer of cations into the hydrocarbon phase. The next short-term goal is to induce crystals when the hydrocarbon phase is (potentially spiked) crude oil to tailor the discoveries towards the longer-term goal: In-situ deep conformance control field applications.