Pressures and Pressure Derivatives of a Vertical Well Located Within Two Inclined Faults: Case Study of Basic Angles and Unequal Well Distances from Faults

Pressure transient analysis has been used to evaluate performance of a vertical well located within two intersecting sealing faults. The nature and types of boundary affect productivity in bounded reservoirs. Well performance is strongly affected by well location with respect to the boundary, be it single, paired and parallel or paired and inclined. The goal of this research was to study pressure behavior as well as performance of a vertical well located within two intersecting sealing faults inclined at various angles θ and at unequal distances to faults. Unlike similar works previously carried out, this work can be used to study or predict pressure distribution of a well in a wedge system located at unequal distances to faults. Using the concept of images, the study proposed new models for estimating distances between image well(s) and active well. These models were applied in the solution to the dimensionless diffusivity equation to characterize pressure transient behavior of a well located at unequal distances to the inclined faults. These pressures and pressure derivatives were computed from the total pressure drop expression summing all the image wells by the principle of superposition. The MATLAB, Python and Excel software were deployed to compute all the dimensionless pressures for the different well designs. The results obtained show that 1) the proposed models give accurate estimation of active well distances to image wells; 2) the models show that the distance between the active and image wells d0,i increases for the range of values of angles 0°< θ0,i ≤ 180° and decreases for the range 180° < θ0,i < 360°; 3) the relationship between unequal well distances and productivity has a maximum point; 4) beyond this point, the well ceases to be productive and; 5) this maximum point is at equal distances of the well from both faults, in this case, 15 ft. Larger magnitudes of dimensionless pressure derivatives would indicate higher oil production for any well design and inclination of the boundaries. Worthy of future works are similar studies on 1) horizontal wells and 2) mixed boundaries, that is, one sealing fault and one constant pressure boundary.