Assessment of the residual life of turbine runners with operational defectiveness

The residual life of the runners of hydraulic turbines in the presence of operational defects is estimated. The main problems of the operation of hydraulic turbines associated with technological defects and exhaustion of the standard resource are described. The main requirements for initial data to be used in estimation of the residual resource and the requirements for predicting the residual resource of runners based on the results of surveys and analysis of their technical condition are specified. We have classified and briefly described the applied approaches and techniques used in estimation of the residual resource. The main damaging factors affecting the residual life of the runners are revealed: deformation aging of the metal, cavitation, corrosion and fatigue damage to the elements of runners. The most characteristic defects are divided into three groups: zones of cavitation erosion; corrosion-fatigue cracks; and weld defects. Particular attention is paid to corrosion-fatigue cracks identified using flaw detection. The mechanism of crack formation and the most probable location of the cracks in the runner are shown. Statistical data on the number of cracks at the onset of the runner operation and at the time of shutdown maintenance are presented. The main statistical parameters of the sample and the parameters of crack size distributions including the distribution law are determined. The distribution law is exponential for the crack length parameter; whereas for the crack opening width it is log-normal. The revealed multidirectional cracks are located at the surface, subsurface or inner layer of the metal. They arise from operational defects (ulcers, craters, undercuts or delamination) and grow during operation of the turbine units. We also present the design schemes of elements with cracks used for quantification of resources according to the criteria of fracture mechanics. The results of calculations for static and dynamic crack resistance are presented as the dependence of stress intensity factors on the crack size. The levels of the total accumulated damage to the runners, the values of the residual life at the stage of crack nucleation and development were determined for 11 hydraulic units in the «start-stop» and «working» cycles. The main conclusion is that the total operating time of the hydraulic turbine runners significantly exceeds the standard operating life, while the residual resource is insufficient for a further period of long-term operation.