Index

Ahmad, Z., F. Al-Sulaiman and B. J. A. Aleem, Corrosion Behavior of Carbon Reinforced Plain-weave Laminates, 23 (10), 1041. Akkaoui, W. and G. Bayram, Effects of Processing Parameters on Mechanical and Thermal Properties of Glass Mat Reinforced Nylon 6 Composites, 23 (8), 881. Aktas , A., Elastic–Plastic Stress Analysis and Plastic Region Expansion of Clamped Aluminum Metal–Matrix Laminated Plates with an Elliptical Hole, 23 (18), 1997. Arslan, N., M. O. Kaman and M. Duranay, Elastic–Plastic Stress Analysis in Aluminum Metal–Matrix Composite-laminated Plates ([0 / ]2) Under Transverse Uniformly Distributed Load, 23 (18), 2025. Ataberk, N., M. Uyaner, A. Avci and S. Koçak, Elasto-plastic Stress Analysis of Aluminum Metal–Matrix Composite Plate Under In-plane Loading, 23 (5), 563. Béchet, E., E. Ruiz, F. Trochu and J.-C. Cuilliere, Re-meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding, 23 (1), 17. Bates, P. and I. Ekhator, Continuous Consolidation of Commingled Glass and Polypropylene Roving, 23 (13), 1409. Baucom, J. N., M. A. Zikry and Y. Qiu, Dynamic and Quasi-static Failure Evolution of 3D Woven Cellular Composite Systems, 23 (5), 471. Çallioğlu, H., S. Aksoy, O. Sayman and H. Yildiz, An Elastic–Plastic and Residual Stress Analysis of Symmetric Laminated Cantilever Beam Under A Bending Moment, 23 (2), 195. Çallioğlu, H., Stress Analysis of an Orthotropic Rotating Disc under Thermal Loading, 23 (17), 1859. Chandrasekaran, E., K. Jayaraman and S. M. Nazeer, Effects of Symmetric and Antisymmetric Fiber Orientations on the Natural Frequencies of FRP Aircraft Panel Boards, 23 (8), 831. Chang, C.-Y., L.-W. Hourng and C.-S. Yu, Analysis of Flow Phenomena during the Filling Stage of CTM, 23 (14), 1561. Chen, G., X. Cheng, Z. Li and C. Kou,Hygrothermal Properties of Stitched and Unstitched Uniweave T300/QY9512 Laminates (With a Hole), 23 (15), 1663. Chen, G., Z. Li, C. Kou and L. Gui, Finite Element Analysis of Low-velocity Impact Damage of Stitched Laminates, 23 (9), 987. Chen, S.-C., M.-C. Lin, R. D. Chien, M.-Y. Teng and C.-S. Chen, Surface Visual Quality of Gas-assisted Injection Molded ABS Parts with Various Gas Channel Designs, 23 (10), 1115. Chien, R. D., S.-C. Chen, P.-H. Lee and J.-S. Huang, Study on the Molding Characteristics and Mechanical Properties of Injection-molded Foaming Polypropylene Parts, 23 (4), 429. Chien, R.-D., N.-T. Cheng and S.-C. Chen, Study of the Bending Properties in Gas-assisted Injection Molded Fiber-reinforced Nylon Parts, 23 (16), 1779.