Experimental Investigation of Iodine Removal in a Submerged Venturi Scrubber

Severe nuclear accidents can cause over-pressurization and serious damage to the containment of a nuclear power plant, which can result in the release of radioactivity into the environment. Filtered containment venting systems are a nuclear safety system that is designed to control over-pressurization and prevent radioactive fission products from spreading into the environment in the case of a severe accident. Iodine is one of the most harmful products among this list of fissionable products, as it can cause thyroid cancer. The removal of iodine is very important in order to ensure the safety of people and the environment. Thus, an indigenous lab scale setup of this system was developed at PIEAS to conduct research on iodine removal. It is comprised of a compressor for replicating high-pressure accident scenarios, a heater to keep iodine in a vapor form, a dosing pump for the injection of iodine, and a venturi scrubber, submerged in the scrubbing column, containing a solution of 0.2% sodium thiosulphate and 0.5% sodium hydroxide. Inlet and outlet samples were trapped in 0.1 M KOH solution and analyzed via UV-VIS spectroscopy. Operating parameters play an important role in the working of a venturi scrubber. The throat velocity was varied to determine its influence on the removal efficiency of iodine. An increase in removal efficiency was observed with an increase in throat velocity. A removal efficiency of >99% was achieved, which fulfilled the requirements for FCVS.