稻壳替代水泥对混凝土力学性能的影响

IF 1.1 Q4 ENGINEERING, MECHANICAL
Sakhiah Abdul Kudus
{"title":"稻壳替代水泥对混凝土力学性能的影响","authors":"Sakhiah Abdul Kudus","doi":"10.24191/jmeche.v20i2.22056","DOIUrl":null,"url":null,"abstract":"The cost of producing concrete has increased, and its effects on the natural environment have become apparent. The ideal solution is to use agro-waste material instead of cement in concrete. This research aims to determine how well RHA works as a cement substitute. At increments of 5%, 10%, and 15%, rice husk was applied in substitute of cement. Compressive and flexural tests were performed on a 100 mm x 100 mm x 100 mm cube and 100 mm x 100 mm x 500 mm prisms with varying percentages of RHA substitution. Findings show that the highest control sample has a compressive strength of 49.83 MPa while t The compressive strength began to drop at 5% RHA substitution. The compressive strength decreased as the percentage of RHA used increased from 10% to 15%. The flexural strength data shows that the 10% RHA has a maximum of 4.90 MPa. The lowest value is 3.85 MPa, and it is only seen from 5% of RHA. Thus, it can be inferred that an RHA replacement level of 5% in cement yields a tremendous increase in compressive strength.","PeriodicalId":16166,"journal":{"name":"Journal of Mechanical Engineering and Sciences","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-04-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Rice-Husk as Replacement Cement on Mechanical Properties Concrete\",\"authors\":\"Sakhiah Abdul Kudus\",\"doi\":\"10.24191/jmeche.v20i2.22056\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The cost of producing concrete has increased, and its effects on the natural environment have become apparent. The ideal solution is to use agro-waste material instead of cement in concrete. This research aims to determine how well RHA works as a cement substitute. At increments of 5%, 10%, and 15%, rice husk was applied in substitute of cement. Compressive and flexural tests were performed on a 100 mm x 100 mm x 100 mm cube and 100 mm x 100 mm x 500 mm prisms with varying percentages of RHA substitution. Findings show that the highest control sample has a compressive strength of 49.83 MPa while t The compressive strength began to drop at 5% RHA substitution. The compressive strength decreased as the percentage of RHA used increased from 10% to 15%. The flexural strength data shows that the 10% RHA has a maximum of 4.90 MPa. The lowest value is 3.85 MPa, and it is only seen from 5% of RHA. Thus, it can be inferred that an RHA replacement level of 5% in cement yields a tremendous increase in compressive strength.\",\"PeriodicalId\":16166,\"journal\":{\"name\":\"Journal of Mechanical Engineering and Sciences\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-04-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Mechanical Engineering and Sciences\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.24191/jmeche.v20i2.22056\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Mechanical Engineering and Sciences","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.24191/jmeche.v20i2.22056","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

摘要

生产混凝土的成本增加了,它对自然环境的影响也变得明显。理想的解决方案是用农业废料代替混凝土中的水泥。本研究旨在确定RHA作为水泥替代品的效果。以5%、10%和15%的添加量,用稻壳代替水泥。在100 mm × 100 mm × 100 mm立方体和100 mm × 100 mm × 500 mm棱镜上进行压缩和弯曲试验,并使用不同比例的RHA替代。结果表明,对照试样的抗压强度最高,为49.83 MPa,当RHA取代量为5%时,抗压强度开始下降。抗压强度随RHA用量从10%增加到15%而降低。抗折强度数据表明,10% RHA的抗折强度最大值为4.90 MPa。最小值为3.85 MPa,仅在5%的RHA中可见。由此可以推断,水泥中RHA置换水平为5%时,抗压强度显著提高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of Rice-Husk as Replacement Cement on Mechanical Properties Concrete
The cost of producing concrete has increased, and its effects on the natural environment have become apparent. The ideal solution is to use agro-waste material instead of cement in concrete. This research aims to determine how well RHA works as a cement substitute. At increments of 5%, 10%, and 15%, rice husk was applied in substitute of cement. Compressive and flexural tests were performed on a 100 mm x 100 mm x 100 mm cube and 100 mm x 100 mm x 500 mm prisms with varying percentages of RHA substitution. Findings show that the highest control sample has a compressive strength of 49.83 MPa while t The compressive strength began to drop at 5% RHA substitution. The compressive strength decreased as the percentage of RHA used increased from 10% to 15%. The flexural strength data shows that the 10% RHA has a maximum of 4.90 MPa. The lowest value is 3.85 MPa, and it is only seen from 5% of RHA. Thus, it can be inferred that an RHA replacement level of 5% in cement yields a tremendous increase in compressive strength.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
42
审稿时长
20 weeks
期刊介绍: The Journal of Mechanical Engineering & Sciences "JMES" (ISSN (Print): 2289-4659; e-ISSN: 2231-8380) is an open access peer-review journal (Indexed by Emerging Source Citation Index (ESCI), WOS; SCOPUS Index (Elsevier); EBSCOhost; Index Copernicus; Ulrichsweb, DOAJ, Google Scholar) which publishes original and review articles that advance the understanding of both the fundamentals of engineering science and its application to the solution of challenges and problems in mechanical engineering systems, machines and components. It is particularly concerned with the demonstration of engineering science solutions to specific industrial problems. Original contributions providing insight into the use of analytical, computational modeling, structural mechanics, metal forming, behavior and application of advanced materials, impact mechanics, strain localization and other effects of nonlinearity, fluid mechanics, robotics, tribology, thermodynamics, and materials processing generally from the core of the journal contents are encouraged. Only original, innovative and novel papers will be considered for publication in the JMES. The authors are required to confirm that their paper has not been submitted to any other journal in English or any other language. The JMES welcome contributions from all who wishes to report on new developments and latest findings in mechanical engineering.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信