M. Sharifi Ghazijahani, C. Kästner, V. Valori, A. Thieme, K. Täschner, J. Schumacher, C. Cierpka
{"title":"SCALEX设备-一种用于规模流体动力学实验的设备","authors":"M. Sharifi Ghazijahani, C. Kästner, V. Valori, A. Thieme, K. Täschner, J. Schumacher, C. Cierpka","doi":"10.1515/teme-2022-0121","DOIUrl":null,"url":null,"abstract":"Abstract The working conditions of the Scaled Convective Airflow Laboratory Experiment (SCALEX) at Technische Universität Ilmenau and sample experiments are reported. The SCALEX facility is a pressure vessel which allows for downscaling of laboratory experiments up to a factor of 20 by compression of gaseous working fluids, air or sulfur hexafluoride, to change the material properties of the fluid. The requirements and conditions for downscaling of fluid dynamical problems are discussed in detail. Long-term high and low pressure tests are conducted to screen the stability of the experimental environment inside the vessel against pressure and temperature fluctuations. Finally, a Rayleigh–Bénard convection experiment at an aspect ratio 10 is performed inside the SCALEX facility as a proof of concept. The reference experiment was conducted under 4.5 bar pressure for Ra = 1.9 × 105. However, the Rayleigh number could be varied in a wide range of Ra = 104 … 108. The flow investigation was pursued with stereoscopic particle image velocimetry in horizontal mid-plane through the convection cell. To improve the image quality the cameras were placed inside the pressure cell and tested up to 6 bar. Thus the feasibility of optical flow measurements at elevated pressures is shown.","PeriodicalId":56086,"journal":{"name":"Tm-Technisches Messen","volume":"428 1","pages":"296 - 309"},"PeriodicalIF":0.8000,"publicationDate":"2023-02-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"The SCALEX facility – an apparatus for scaled fluid dynamical experiments\",\"authors\":\"M. Sharifi Ghazijahani, C. Kästner, V. Valori, A. Thieme, K. Täschner, J. Schumacher, C. Cierpka\",\"doi\":\"10.1515/teme-2022-0121\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract The working conditions of the Scaled Convective Airflow Laboratory Experiment (SCALEX) at Technische Universität Ilmenau and sample experiments are reported. The SCALEX facility is a pressure vessel which allows for downscaling of laboratory experiments up to a factor of 20 by compression of gaseous working fluids, air or sulfur hexafluoride, to change the material properties of the fluid. The requirements and conditions for downscaling of fluid dynamical problems are discussed in detail. Long-term high and low pressure tests are conducted to screen the stability of the experimental environment inside the vessel against pressure and temperature fluctuations. Finally, a Rayleigh–Bénard convection experiment at an aspect ratio 10 is performed inside the SCALEX facility as a proof of concept. The reference experiment was conducted under 4.5 bar pressure for Ra = 1.9 × 105. However, the Rayleigh number could be varied in a wide range of Ra = 104 … 108. The flow investigation was pursued with stereoscopic particle image velocimetry in horizontal mid-plane through the convection cell. To improve the image quality the cameras were placed inside the pressure cell and tested up to 6 bar. Thus the feasibility of optical flow measurements at elevated pressures is shown.\",\"PeriodicalId\":56086,\"journal\":{\"name\":\"Tm-Technisches Messen\",\"volume\":\"428 1\",\"pages\":\"296 - 309\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2023-02-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tm-Technisches Messen\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1515/teme-2022-0121\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"INSTRUMENTS & INSTRUMENTATION\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tm-Technisches Messen","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1515/teme-2022-0121","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"INSTRUMENTS & INSTRUMENTATION","Score":null,"Total":0}
The SCALEX facility – an apparatus for scaled fluid dynamical experiments
Abstract The working conditions of the Scaled Convective Airflow Laboratory Experiment (SCALEX) at Technische Universität Ilmenau and sample experiments are reported. The SCALEX facility is a pressure vessel which allows for downscaling of laboratory experiments up to a factor of 20 by compression of gaseous working fluids, air or sulfur hexafluoride, to change the material properties of the fluid. The requirements and conditions for downscaling of fluid dynamical problems are discussed in detail. Long-term high and low pressure tests are conducted to screen the stability of the experimental environment inside the vessel against pressure and temperature fluctuations. Finally, a Rayleigh–Bénard convection experiment at an aspect ratio 10 is performed inside the SCALEX facility as a proof of concept. The reference experiment was conducted under 4.5 bar pressure for Ra = 1.9 × 105. However, the Rayleigh number could be varied in a wide range of Ra = 104 … 108. The flow investigation was pursued with stereoscopic particle image velocimetry in horizontal mid-plane through the convection cell. To improve the image quality the cameras were placed inside the pressure cell and tested up to 6 bar. Thus the feasibility of optical flow measurements at elevated pressures is shown.
期刊介绍:
The journal promotes dialogue between the developers of application-oriented sensors, measurement systems, and measurement methods and the manufacturers and measurement technologists who use them.
Topics
The manufacture and characteristics of new sensors for measurement technology in the industrial sector
New measurement methods
Hardware and software based processing and analysis of measurement signals to obtain measurement values
The outcomes of employing new measurement systems and methods.