Increasing the production of the Mo-99 isotope by modernizing the design of targets irradiated in the experimental channels of the VVR-c reactor

There are various ways to obtain Mo-99. Some of them are widely used in industrial production, others are in the research stage with the aim of increasing the product yield. The main industrial method for obtaining Mo-99 using a nuclear reactor is the fragmentation method. This method provides for the presence of a uranium target and a nuclear reactor. The target is placed in the channel of the reactor core and irradiated with neutrons for the required time. After that, the target is removed from the channel to the “hot” chamber for the chemical separation of Mo-99. This is how Mo-99 is obtained practically all over the world. The paper considers the fragmentation method for producing Mo-99, which is implemented on the basis of the engineering and technological complex of the VVR-c research nuclear reactor. In order to increase the yield of Mo-99, a modernized model of the “tube-in-tube” target is proposed. The assessment of the production of Mo-99 and the cooling efficiency of the modernized target was carried out. The calculations were performed using the VisualBurnOut and Ansys CFX software packages. Computational studies have shown an increase in the energy release and the amount of the produced Mo-99 isotope in the target of the modernized design. In the most stressed zones, the target wall temperature exceeds the water saturation temperature. Surface boiling occurs in these zones. As a result, turbulization and mixing of the near-wall boundary water layer increases. This improves heat dissipation.