一种低成本的方法来设计特斯拉变压器测试绝缘材料和工业应用

Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316) Pub Date : 2002-04-07 DOI:10.1109/ELINSL.2002.995924

C. Boonseng, P. Apiratikul, C. Phanomsarnrin

{"title":"一种低成本的方法来设计特斯拉变压器测试绝缘材料和工业应用","authors":"C. Boonseng, P. Apiratikul, C. Phanomsarnrin","doi":"10.1109/ELINSL.2002.995924","DOIUrl":null,"url":null,"abstract":"In view of the stringent quality requirements for solid dielectric bushings, a wide range of quality assurance techniques is applied. High frequency testing is by far the most effective destructive test for screening and rejecting poor quality insulation bushings. This paper presents the design and construction of a Tesla transformer for defective insulation testing. The attempts of developing a prototype have low cost of all components. A design technique and testing method are fully given. The calculation is based on stress control so that optimum electric stress can be obtained. A high frequency generator has been tested and used in a bushing factory for routine testing according to TIS. 354-2523 (Thai Industrial Standard). From the results, a prototype unit is found to possess accuracy within an acceptable level.","PeriodicalId":10532,"journal":{"name":"Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316)","volume":"8 1","pages":"248-251"},"PeriodicalIF":0.0000,"publicationDate":"2002-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"A low cost approach to design the Tesla transformer for testing of insulating materials and industrial applications\",\"authors\":\"C. Boonseng, P. Apiratikul, C. Phanomsarnrin\",\"doi\":\"10.1109/ELINSL.2002.995924\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In view of the stringent quality requirements for solid dielectric bushings, a wide range of quality assurance techniques is applied. High frequency testing is by far the most effective destructive test for screening and rejecting poor quality insulation bushings. This paper presents the design and construction of a Tesla transformer for defective insulation testing. The attempts of developing a prototype have low cost of all components. A design technique and testing method are fully given. The calculation is based on stress control so that optimum electric stress can be obtained. A high frequency generator has been tested and used in a bushing factory for routine testing according to TIS. 354-2523 (Thai Industrial Standard). From the results, a prototype unit is found to possess accuracy within an acceptable level.\",\"PeriodicalId\":10532,\"journal\":{\"name\":\"Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316)\",\"volume\":\"8 1\",\"pages\":\"248-251\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2002-04-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ELINSL.2002.995924\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ELINSL.2002.995924","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

鉴于固体介质套管的严格质量要求，采用了广泛的质量保证技术。高频测试是迄今为止筛选和淘汰劣质绝缘套管最有效的破坏性测试。本文介绍了一种用于绝缘缺陷检测的特斯拉变压器的设计和构造。开发原型的尝试具有所有组件的低成本。给出了设计方法和测试方法。计算基于应力控制，以获得最佳的电应力。高频发生器已在某轴套厂进行了测试，并按TIS进行了常规测试。354-2523(泰国工业标准)。从结果来看，发现原型单元在可接受的水平内具有精度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

A low cost approach to design the Tesla transformer for testing of insulating materials and industrial applications

In view of the stringent quality requirements for solid dielectric bushings, a wide range of quality assurance techniques is applied. High frequency testing is by far the most effective destructive test for screening and rejecting poor quality insulation bushings. This paper presents the design and construction of a Tesla transformer for defective insulation testing. The attempts of developing a prototype have low cost of all components. A design technique and testing method are fully given. The calculation is based on stress control so that optimum electric stress can be obtained. A high frequency generator has been tested and used in a bushing factory for routine testing according to TIS. 354-2523 (Thai Industrial Standard). From the results, a prototype unit is found to possess accuracy within an acceptable level.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316)

自引率

0.00%

发文量