Extended Short-Wave Infrared Absorption in Group-IV Nanowire Arrays

Engineering light absorption in the extended short-wave infrared (e-SWIR) range using scalable materials is a long-sought-after capability that is crucial to implement cost-effective and high-performance sensing and imaging technologies. Herein, we demonstrate enhanced, tunable e-SWIR absorption using silicon-integrated platforms consisting of ordered arrays of metastable GeSn nanowires with Sn content reaching 9 at.% and variable diameters. Detailed simulations were combined with experimental analyses to systematically investigate light-GeSn nanowire interactions to tailor and optimize the nanowire array geometrical parameters and the corresponding optical response. The diameter-dependent leaky mode resonance peaks are theoretically predicted and experimentally confirmed with a tunable wavelength from 1.5 to 2.2 {\mu}m. A three-fold enhancement in the absorption with respect to GeSn layers at 2.1 {\mu}m was achieved using nanowires with a diameter of 325 nm. Finite difference time domain simulations unraveled the underlying mechanisms of the e-SWIR enhanced absorption. Coupling of the HE11 and HE12 resonant modes to nanowires is observed at diameters above 325 nm, while at smaller diameters and longer wavelengths the HE11 mode is guided into the underlying Ge layer. The presence of tapering in NWs further extends the absorption range while minimizing reflection. This ability to engineer and enhance e-SWIR absorption lays the groundwork to implement novel photonic devices exploiting all-group IV platforms.