主动超导特公爵探测器

С.В. Шитов
{"title":"主动超导特公爵探测器","authors":"С.В. Шитов","doi":"10.21883/jtf.2023.07.55758.116-23","DOIUrl":null,"url":null,"abstract":"The concept of an active superconducting terahertz detector for array applications is based on the combination of an RFTES bolometer and a microwave preamplifier based on a DC SQUID within the common integrated circuit providing the maximum, theoretically possible, signal transmission from the sensor to the amplifier. The problems associated with the design and positioning of the amplifier, that restrict the functionality and sensitivity of the ultra-low temperature detector, are considered. For the first time, a method for connecting a SQUID amplifier to an RFTES bolometer using the principle of partial loads of a resonator has been proposed and analyzed. The presented electromagnetic model of the active detector is suitable for optimization of RFTES, MKID and other detectors using high-Q superconducting planar resonators.","PeriodicalId":24036,"journal":{"name":"Журнал технической физики","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Активный сверхпроводящий терагерцовый детектор\",\"authors\":\"С.В. Шитов\",\"doi\":\"10.21883/jtf.2023.07.55758.116-23\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The concept of an active superconducting terahertz detector for array applications is based on the combination of an RFTES bolometer and a microwave preamplifier based on a DC SQUID within the common integrated circuit providing the maximum, theoretically possible, signal transmission from the sensor to the amplifier. The problems associated with the design and positioning of the amplifier, that restrict the functionality and sensitivity of the ultra-low temperature detector, are considered. For the first time, a method for connecting a SQUID amplifier to an RFTES bolometer using the principle of partial loads of a resonator has been proposed and analyzed. The presented electromagnetic model of the active detector is suitable for optimization of RFTES, MKID and other detectors using high-Q superconducting planar resonators.\",\"PeriodicalId\":24036,\"journal\":{\"name\":\"Журнал технической физики\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Журнал технической физики\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.21883/jtf.2023.07.55758.116-23\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Журнал технической физики","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21883/jtf.2023.07.55758.116-23","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

用于阵列应用的有源超导太赫兹探测器的概念是基于RFTES测热计和基于直流SQUID的微波前置放大器的组合,在公共集成电路中提供最大的,理论上可能的,从传感器到放大器的信号传输。考虑了与放大器的设计和定位有关的问题,这些问题限制了超低温探测器的功能和灵敏度。本文首次提出并分析了一种利用谐振腔部分负载原理将SQUID放大器连接到RFTES测热计的方法。提出的有源探测器的电磁模型适用于RFTES、MKID等采用高q超导平面谐振腔的探测器的优化。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Активный сверхпроводящий терагерцовый детектор
The concept of an active superconducting terahertz detector for array applications is based on the combination of an RFTES bolometer and a microwave preamplifier based on a DC SQUID within the common integrated circuit providing the maximum, theoretically possible, signal transmission from the sensor to the amplifier. The problems associated with the design and positioning of the amplifier, that restrict the functionality and sensitivity of the ultra-low temperature detector, are considered. For the first time, a method for connecting a SQUID amplifier to an RFTES bolometer using the principle of partial loads of a resonator has been proposed and analyzed. The presented electromagnetic model of the active detector is suitable for optimization of RFTES, MKID and other detectors using high-Q superconducting planar resonators.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信