Converged Analog Fiber-Wireless Point-to-Multipoint Architecture for eCPRI 5G Fronthaul Networks

5G New Radio's (NR) spectrum expansion towards higher bands, although critical towards achieving the envisioned 5G capacity requirements, creates the need for installing a very large number of Access Points (APs), which asserts tremendous capital burden on the Mobile Network Operators. Current centralization solutions such as the Cloud Radio Access Network (C-RAN) alleviate partially the costs of densification by moving the majority of radio processing functionalities from the Remote Radio Heads (RRHs) to the central Base Band Unit (BBU), but still require very high-speed Point-to-Point links between the BBU and each RRH mainly due to the digitized Common Public Radio Interface (CPRI) that is excessively inefficient for hauling broadband signals. In this article, we present a novel architecture that employs an analog converged Fiber-Wireless scheme in order to create a very spectrally efficient Point-to-Multipoint network capable of interconnecting a large number of APs, while allowing compatibility with mature Ethernet-based low-cost equipment. Preliminary simulation results show very low end-to-end Ethernet packet delay, well below eCPRI's 100 μs mark, even for fiber lengths up to 10 km, indicating the suitability of our solution for employment in 5G NR large-scale fronthaul networks.