双组份熔融纺丝法制备非晶/晶塑性液体不混相铁硅硼合金的显微组织和力学性能

K. Ziewiec, M. Wojciechowska, D. Mucha, A. Ziewiec
{"title":"双组份熔融纺丝法制备非晶/晶塑性液体不混相铁硅硼合金的显微组织和力学性能","authors":"K. Ziewiec, M. Wojciechowska, D. Mucha, A. Ziewiec","doi":"10.7494/MAFE.2017.43.1.57","DOIUrl":null,"url":null,"abstract":"The two-component melt-spun (TCMS) Fe71.25Si9.5B14.25In5 alloy was produced from Fe75Si10B15 and Fe67.5Si9B13.5In10 alloys. The microstructure of the TCMS alloy was investigated by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). A tensile test of the alloy resulted in a tensile strength of Rm = 1040 MPa, yield strength Re = 919 MPa, total plastic elongation etot = 3.29%, and traces of plastic deformation on the surface of the Fe-Si-B-In TCMS sample. Microstructural analysis of the amorphous/crystalline composite and tensile sample free surface show the reason for the ductility of the sample in relation to the Fe75Si10B15 alloy.","PeriodicalId":18751,"journal":{"name":"Metallurgy and Foundry Engineering","volume":"120 1","pages":"57"},"PeriodicalIF":0.0000,"publicationDate":"2017-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AMORPHOUS/CRYSTALLINE DUCTILE LIQUID IMMISCIBLE Fe-Si-B-In ALLOY PRODUCED BY TWO-COMPONENT MELT-SPINNING\",\"authors\":\"K. Ziewiec, M. Wojciechowska, D. Mucha, A. Ziewiec\",\"doi\":\"10.7494/MAFE.2017.43.1.57\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The two-component melt-spun (TCMS) Fe71.25Si9.5B14.25In5 alloy was produced from Fe75Si10B15 and Fe67.5Si9B13.5In10 alloys. The microstructure of the TCMS alloy was investigated by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). A tensile test of the alloy resulted in a tensile strength of Rm = 1040 MPa, yield strength Re = 919 MPa, total plastic elongation etot = 3.29%, and traces of plastic deformation on the surface of the Fe-Si-B-In TCMS sample. Microstructural analysis of the amorphous/crystalline composite and tensile sample free surface show the reason for the ductility of the sample in relation to the Fe75Si10B15 alloy.\",\"PeriodicalId\":18751,\"journal\":{\"name\":\"Metallurgy and Foundry Engineering\",\"volume\":\"120 1\",\"pages\":\"57\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-10-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metallurgy and Foundry Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.7494/MAFE.2017.43.1.57\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metallurgy and Foundry Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.7494/MAFE.2017.43.1.57","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

摘要

以Fe75Si10B15和Fe67.5Si9B13.5In10合金为原料,制备了双组份熔融纺丝Fe71.25Si9.5B14.25In5合金。采用扫描电子显微镜(SEM)和x射线衍射仪(XRD)研究了TCMS合金的显微组织。拉伸试验结果表明,该合金的抗拉强度为Rm = 1040 MPa,屈服强度Re = 919 MPa,总塑性伸长率ett = 3.29%, Fe-Si-B-In TCMS样品表面有塑性变形痕迹。非晶/晶复合材料和拉伸试样自由表面的显微组织分析揭示了试样相对于Fe75Si10B15合金具有延展性的原因。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AMORPHOUS/CRYSTALLINE DUCTILE LIQUID IMMISCIBLE Fe-Si-B-In ALLOY PRODUCED BY TWO-COMPONENT MELT-SPINNING
The two-component melt-spun (TCMS) Fe71.25Si9.5B14.25In5 alloy was produced from Fe75Si10B15 and Fe67.5Si9B13.5In10 alloys. The microstructure of the TCMS alloy was investigated by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). A tensile test of the alloy resulted in a tensile strength of Rm = 1040 MPa, yield strength Re = 919 MPa, total plastic elongation etot = 3.29%, and traces of plastic deformation on the surface of the Fe-Si-B-In TCMS sample. Microstructural analysis of the amorphous/crystalline composite and tensile sample free surface show the reason for the ductility of the sample in relation to the Fe75Si10B15 alloy.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信