Zhixiang Lv, Xin Yang, Jihong Han, Yingyao Wang, Jiao Zou, Anqi Yang, Haoda Zhang, Nan He
{"title":"甲基蓝在磁性MgxCoyZn(1-x-y)Fe2O4纳米粒子上的吸附特性及电化学行为","authors":"Zhixiang Lv, Xin Yang, Jihong Han, Yingyao Wang, Jiao Zou, Anqi Yang, Haoda Zhang, Nan He","doi":"10.1155/2023/8803540","DOIUrl":null,"url":null,"abstract":"Magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles were successfully prepared by the rapid combustion approach, and SEM, XRD, VSM, EDX, and FTIR techniques were applied for their characterization. The influence of the element ratios (Mg2+, Co2+, and Zn2+) in magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles on their properties was explored. To acquire a larger specific surface area for better adsorption of methyl blue (MB), magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles calcined at 400°C for 2 h with 25 mL anhydrous ethanol were selected, and their average particle size and the saturation magnetization were about 81.3 nm and 13.5 emu·g-1, respectively. Adsorption kinetics models and adsorption isotherm models were applied to research the adsorption characteristics of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles. The pseudo-second-order kinetics model (\n \n \n \n R\n \n \n 2\n \n \n >\n 0.99\n \n ) and Temkin isotherm model (\n \n \n \n R\n \n \n 2\n \n \n =\n 0.9887\n \n ) were the most consistent with the data, indicating that the adsorption was the chemical multilayer adsorption mechanism, and the process was an exothermic reaction. The E of the Dubinin-Radushkevich (D-R) isotherm model was 0.2347 KJ·mol-1, indicating the adsorption involved physical adsorption besides chemical adsorption. The \n \n Δ\n \n \n G\n \n \n 0\n \n \n \n and \n \n Δ\n \n \n H\n \n \n 0\n \n \n \n (\n \n Δ\n \n \n H\n \n \n 0\n \n \n =\n −\n 10.38\n \n KJ·mol-1) of the adsorption process of MB adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles measured through the thermodynamic experiment were both less than 0, which proved that the process was a spontaneous exothermic reaction. The adsorption capacity of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles increased with the pH of MB solution increasing from 2 to 4 at room temperature, and it had no significant change when the pH of MB solution was 4-12, while the relative removal rate was 98.75% of the first one after 2 cycles. The electrochemical impedance spectroscopy (EIS) and the cyclic voltammetry (CV) data further demonstrated that MB was adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles.","PeriodicalId":7279,"journal":{"name":"Adsorption Science & Technology","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-05-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Adsorption Characteristics and Electrochemical Behaviors of Methyl Blue onto Magnetic MgxCoyZn(1-x-y)Fe2O4 Nanoparticles\",\"authors\":\"Zhixiang Lv, Xin Yang, Jihong Han, Yingyao Wang, Jiao Zou, Anqi Yang, Haoda Zhang, Nan He\",\"doi\":\"10.1155/2023/8803540\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles were successfully prepared by the rapid combustion approach, and SEM, XRD, VSM, EDX, and FTIR techniques were applied for their characterization. The influence of the element ratios (Mg2+, Co2+, and Zn2+) in magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles on their properties was explored. To acquire a larger specific surface area for better adsorption of methyl blue (MB), magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles calcined at 400°C for 2 h with 25 mL anhydrous ethanol were selected, and their average particle size and the saturation magnetization were about 81.3 nm and 13.5 emu·g-1, respectively. Adsorption kinetics models and adsorption isotherm models were applied to research the adsorption characteristics of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles. The pseudo-second-order kinetics model (\\n \\n \\n \\n R\\n \\n \\n 2\\n \\n \\n >\\n 0.99\\n \\n ) and Temkin isotherm model (\\n \\n \\n \\n R\\n \\n \\n 2\\n \\n \\n =\\n 0.9887\\n \\n ) were the most consistent with the data, indicating that the adsorption was the chemical multilayer adsorption mechanism, and the process was an exothermic reaction. The E of the Dubinin-Radushkevich (D-R) isotherm model was 0.2347 KJ·mol-1, indicating the adsorption involved physical adsorption besides chemical adsorption. The \\n \\n Δ\\n \\n \\n G\\n \\n \\n 0\\n \\n \\n \\n and \\n \\n Δ\\n \\n \\n H\\n \\n \\n 0\\n \\n \\n \\n (\\n \\n Δ\\n \\n \\n H\\n \\n \\n 0\\n \\n \\n =\\n −\\n 10.38\\n \\n KJ·mol-1) of the adsorption process of MB adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles measured through the thermodynamic experiment were both less than 0, which proved that the process was a spontaneous exothermic reaction. The adsorption capacity of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles increased with the pH of MB solution increasing from 2 to 4 at room temperature, and it had no significant change when the pH of MB solution was 4-12, while the relative removal rate was 98.75% of the first one after 2 cycles. The electrochemical impedance spectroscopy (EIS) and the cyclic voltammetry (CV) data further demonstrated that MB was adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles.\",\"PeriodicalId\":7279,\"journal\":{\"name\":\"Adsorption Science & Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-05-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Adsorption Science & Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1155/2023/8803540\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Adsorption Science & Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1155/2023/8803540","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
采用快速燃烧法制备了磁性MgxCoyZn(1-x-y)Fe2O4纳米颗粒,并用SEM、XRD、VSM、EDX和FTIR等技术对其进行了表征。探讨了磁性MgxCoyZn(1-x-y)Fe2O4纳米颗粒中元素配比(Mg2+、Co2+和Zn2+)对其性能的影响。为了获得更大的比表面积以更好地吸附甲基蓝(MB),选择了磁性纳米颗粒Mg0.4Co0.5Zn0.1Fe2O4,在25 mL无水乙醇中,在400℃下煅烧2 h,其平均粒径和饱和磁化强度分别约为81.3 nm和13.5 emu·g-1。采用吸附动力学模型和吸附等温线模型研究了MB在磁性Mg0.4Co0.5Zn0.1Fe2O4纳米粒子上的吸附特性。拟二级动力学模型(r2 > 0.99)和Temkin等温模型(r2 = 0.9887)与实验数据最吻合,表明吸附为化学多层吸附机理,过程为放热反应。Dubinin-Radushkevich (D-R)等温线模型的E值为0.2347 KJ·mol-1,说明吸附除化学吸附外还包括物理吸附。热力学实验测得磁性Mg0.4Co0.5Zn0.1Fe2O4纳米粒子吸附MB过程的Δ G 0和Δ H 0 (Δ H 0 =−10.38 KJ·mol-1)均小于0,证明该过程为自发放热反应。在室温条件下,MB在磁性Mg0.4Co0.5Zn0.1Fe2O4纳米粒子上的吸附量随着MB溶液pH从2增加到4而增加,而MB溶液pH为4 ~ 12时吸附量变化不显著,循环2次后的相对去除率为第一次的98.75%。电化学阻抗谱(EIS)和循环伏安法(CV)进一步证实了MB被吸附在磁性Mg0.4Co0.5Zn0.1Fe2O4纳米颗粒上。
Adsorption Characteristics and Electrochemical Behaviors of Methyl Blue onto Magnetic MgxCoyZn(1-x-y)Fe2O4 Nanoparticles
Magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles were successfully prepared by the rapid combustion approach, and SEM, XRD, VSM, EDX, and FTIR techniques were applied for their characterization. The influence of the element ratios (Mg2+, Co2+, and Zn2+) in magnetic MgxCoyZn(1-x-y)Fe2O4 nanoparticles on their properties was explored. To acquire a larger specific surface area for better adsorption of methyl blue (MB), magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles calcined at 400°C for 2 h with 25 mL anhydrous ethanol were selected, and their average particle size and the saturation magnetization were about 81.3 nm and 13.5 emu·g-1, respectively. Adsorption kinetics models and adsorption isotherm models were applied to research the adsorption characteristics of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles. The pseudo-second-order kinetics model (
R
2
>
0.99
) and Temkin isotherm model (
R
2
=
0.9887
) were the most consistent with the data, indicating that the adsorption was the chemical multilayer adsorption mechanism, and the process was an exothermic reaction. The E of the Dubinin-Radushkevich (D-R) isotherm model was 0.2347 KJ·mol-1, indicating the adsorption involved physical adsorption besides chemical adsorption. The
Δ
G
0
and
Δ
H
0
(
Δ
H
0
=
−
10.38
KJ·mol-1) of the adsorption process of MB adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles measured through the thermodynamic experiment were both less than 0, which proved that the process was a spontaneous exothermic reaction. The adsorption capacity of MB onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles increased with the pH of MB solution increasing from 2 to 4 at room temperature, and it had no significant change when the pH of MB solution was 4-12, while the relative removal rate was 98.75% of the first one after 2 cycles. The electrochemical impedance spectroscopy (EIS) and the cyclic voltammetry (CV) data further demonstrated that MB was adsorbed onto magnetic Mg0.4Co0.5Zn0.1Fe2O4 nanoparticles.