基于表面改性纳米颗粒的新型胶凝酸体系——一种独特的无地层损伤增产技术

R. Kalgaonkar, Nour Baqader
{"title":"基于表面改性纳米颗粒的新型胶凝酸体系——一种独特的无地层损伤增产技术","authors":"R. Kalgaonkar, Nour Baqader","doi":"10.2523/iptc-22443-ms","DOIUrl":null,"url":null,"abstract":"\n Gelled acid systems based upon gelation of hydrochloric acid (HCl) are extensively used in both matrix acidizing and fracture acidizing treatments to prevent acidizing fluid leak-off. The gelled-up fluid system helps retard the acid reaction to allow deeper wormhole propagation. Conventional in-situ crosslinked gelled acid systems consist of a polyacrylamide polymer, a crosslinker (such as iron-based crosslinker), a chemical breaker, other additives, along with acid. However, these systems can lead to damaging the formation due to several reasons including unbroken polymer residue or scaling, resulting in lowering of hydrocarbon productivity. To mitigate these drawbacks, we have developed a self-breaking, formation damage-free, novel nanoparticles based gelled acid system to replace the polymer based gelled acid system. The new gelled acid system is based on, surface modified nanoparticles to make them compatible in acidic environment, a gelation activator, acidizing treatment additives along with HCl to overcome the challenges the conventional systems face. The new system can work with up to 28& of HCl up to 300°F with low viscosity at surface, making it easy to be pump. As the acid spends due to reaction with the formation the pH of the fluid transitions from acidic to basic pH. The gelation phenomenon of the new system is controlled by the increasing pH. As the pH increases beyond pH 1 gelation of the nanoparticles occurs thus gelling up the acidic fluid. As the pH further continues to rise beyond pH 4 the nanoparticles lose their capability to gel up and the fluid viscosity decreases to pre-gelation level, facilitating easy post treatment flow back.\n A systematic experimental protocol was followed to develop the new system that is documented in this paper. It is shown that the gelation properties are pH dependent phenomenon providing the critical control over the gelation time and avoiding any premature gelation during pumping the treatment. The effectiveness of the system by not damaging the formation was investigated using regain permeability studies. The new system showed excellent regain permeability. The obtained data confirmed several advantages of the new system over conventional polymer based gelled acid systems. Gelation experiments were performed to gather a better understanding of the gelation mechanism and also to get effective control on the gelation and break properties.\n The uniqueness about the new system is that, it is formation damage free without the need to use polymers or iron based cross-linkers that may lead to potential damage mechanisms.","PeriodicalId":10974,"journal":{"name":"Day 2 Tue, February 22, 2022","volume":"7 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-02-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Surface Modified Nanoparticles Based Novel Gelled Acid System - A Unique Formation Damage Free Well Stimulation Technology\",\"authors\":\"R. Kalgaonkar, Nour Baqader\",\"doi\":\"10.2523/iptc-22443-ms\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Gelled acid systems based upon gelation of hydrochloric acid (HCl) are extensively used in both matrix acidizing and fracture acidizing treatments to prevent acidizing fluid leak-off. The gelled-up fluid system helps retard the acid reaction to allow deeper wormhole propagation. Conventional in-situ crosslinked gelled acid systems consist of a polyacrylamide polymer, a crosslinker (such as iron-based crosslinker), a chemical breaker, other additives, along with acid. However, these systems can lead to damaging the formation due to several reasons including unbroken polymer residue or scaling, resulting in lowering of hydrocarbon productivity. To mitigate these drawbacks, we have developed a self-breaking, formation damage-free, novel nanoparticles based gelled acid system to replace the polymer based gelled acid system. The new gelled acid system is based on, surface modified nanoparticles to make them compatible in acidic environment, a gelation activator, acidizing treatment additives along with HCl to overcome the challenges the conventional systems face. The new system can work with up to 28& of HCl up to 300°F with low viscosity at surface, making it easy to be pump. As the acid spends due to reaction with the formation the pH of the fluid transitions from acidic to basic pH. The gelation phenomenon of the new system is controlled by the increasing pH. As the pH increases beyond pH 1 gelation of the nanoparticles occurs thus gelling up the acidic fluid. As the pH further continues to rise beyond pH 4 the nanoparticles lose their capability to gel up and the fluid viscosity decreases to pre-gelation level, facilitating easy post treatment flow back.\\n A systematic experimental protocol was followed to develop the new system that is documented in this paper. It is shown that the gelation properties are pH dependent phenomenon providing the critical control over the gelation time and avoiding any premature gelation during pumping the treatment. The effectiveness of the system by not damaging the formation was investigated using regain permeability studies. The new system showed excellent regain permeability. The obtained data confirmed several advantages of the new system over conventional polymer based gelled acid systems. Gelation experiments were performed to gather a better understanding of the gelation mechanism and also to get effective control on the gelation and break properties.\\n The uniqueness about the new system is that, it is formation damage free without the need to use polymers or iron based cross-linkers that may lead to potential damage mechanisms.\",\"PeriodicalId\":10974,\"journal\":{\"name\":\"Day 2 Tue, February 22, 2022\",\"volume\":\"7 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-02-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Day 2 Tue, February 22, 2022\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2523/iptc-22443-ms\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 2 Tue, February 22, 2022","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2523/iptc-22443-ms","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

基于盐酸凝胶(HCl)的胶凝酸体系广泛用于基质酸化和压裂酸化处理,以防止酸化液泄漏。凝胶化的流体体系有助于减缓酸反应,从而使虫孔扩展更深。传统的原位交联胶凝酸体系由聚丙烯酰胺聚合物、交联剂(如铁基交联剂)、化学破胶剂、其他添加剂以及酸组成。然而,由于聚合物残留或结垢等原因,这些系统可能会破坏地层,从而降低油气产量。为了减轻这些缺点,我们开发了一种自破、无地层损伤的新型纳米颗粒胶凝酸体系,以取代聚合物基胶凝酸体系。新型胶凝酸体系是基于表面修饰的纳米颗粒(使其在酸性环境中兼容)、胶凝活化剂、酸化处理添加剂以及HCl来克服传统体系面临的挑战。新系统可以在高达28& HCl(高达300°F)的条件下工作,表面粘度低,易于泵送。当酸与地层发生反应时,流体的pH值从酸性转变为碱性。新体系的凝胶化现象受pH值的增加控制。当pH值超过1时,纳米颗粒发生凝胶化,从而使酸性流体凝胶化。当pH值继续上升超过pH 4时,纳米颗粒失去了凝胶化能力,流体粘度降低到凝胶化前的水平,便于处理后回流。系统的实验方案是遵循开发的新系统是在本文中记录。结果表明,凝胶特性是pH依赖性的现象,提供了对凝胶时间的关键控制,避免了泵送处理过程中的任何过早凝胶。通过恢复渗透率研究,研究了该系统不破坏地层的有效性。新体系表现出优异的回弹渗透性。所获得的数据证实了新体系与传统聚合物基胶凝酸体系相比的几个优点。凝胶实验是为了更好地了解凝胶机理,并对凝胶和断裂性能进行有效的控制。新系统的独特之处在于,它不需要使用聚合物或铁基交联剂,这可能会导致潜在的损伤机制。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Surface Modified Nanoparticles Based Novel Gelled Acid System - A Unique Formation Damage Free Well Stimulation Technology
Gelled acid systems based upon gelation of hydrochloric acid (HCl) are extensively used in both matrix acidizing and fracture acidizing treatments to prevent acidizing fluid leak-off. The gelled-up fluid system helps retard the acid reaction to allow deeper wormhole propagation. Conventional in-situ crosslinked gelled acid systems consist of a polyacrylamide polymer, a crosslinker (such as iron-based crosslinker), a chemical breaker, other additives, along with acid. However, these systems can lead to damaging the formation due to several reasons including unbroken polymer residue or scaling, resulting in lowering of hydrocarbon productivity. To mitigate these drawbacks, we have developed a self-breaking, formation damage-free, novel nanoparticles based gelled acid system to replace the polymer based gelled acid system. The new gelled acid system is based on, surface modified nanoparticles to make them compatible in acidic environment, a gelation activator, acidizing treatment additives along with HCl to overcome the challenges the conventional systems face. The new system can work with up to 28& of HCl up to 300°F with low viscosity at surface, making it easy to be pump. As the acid spends due to reaction with the formation the pH of the fluid transitions from acidic to basic pH. The gelation phenomenon of the new system is controlled by the increasing pH. As the pH increases beyond pH 1 gelation of the nanoparticles occurs thus gelling up the acidic fluid. As the pH further continues to rise beyond pH 4 the nanoparticles lose their capability to gel up and the fluid viscosity decreases to pre-gelation level, facilitating easy post treatment flow back. A systematic experimental protocol was followed to develop the new system that is documented in this paper. It is shown that the gelation properties are pH dependent phenomenon providing the critical control over the gelation time and avoiding any premature gelation during pumping the treatment. The effectiveness of the system by not damaging the formation was investigated using regain permeability studies. The new system showed excellent regain permeability. The obtained data confirmed several advantages of the new system over conventional polymer based gelled acid systems. Gelation experiments were performed to gather a better understanding of the gelation mechanism and also to get effective control on the gelation and break properties. The uniqueness about the new system is that, it is formation damage free without the need to use polymers or iron based cross-linkers that may lead to potential damage mechanisms.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信