Synthesis of Voltage PID Controller to Improve INC- MPPT Algorithm for Cascade Regulation of KC200GT Panel-Based Solar System

This paper proposes the Maximum Power Point Tracking MPPT method based on the Incremental Conductance INC algorithm. The primary goal is to prevent the ripple problem that is occurred in the output responses of the solar panel system. This last includes the KC200GT panel system, while using it to supply a resistive load throughout the DC-DC boost converter. This goal is reached through respecting the two following steps. First, the INC algorithm modified so that it produces an optimal reference voltage rather than a duty cycle control, which is often utilized in the standard INC-MPPT control strategy for controlling the switch button of the DC-DC boost converter. Second, the solar system behavior is modeled by the linear small-signal model for the design of the voltage PID controller. At each sample, a voltage discrepancy is generated as a result of comparing the previous reference voltage to the one delivered by the KC200GT panel where the introduction of the voltage PID controller becoming indispensable. These two steps create the development of a novel strategy that is afterwards known as improved INC-MPPT. The performance assessments of the proposed strategy are carried out by simulation using MATLAB®/SIMULINK software, and the obtained results reveal the crucial importance of including the voltage PID controller to overcome the ripple issue, occurred when applying the standard INC-MPPT control strategy.