STUDY OF THE RHEOLOGICAL AND PHYSICOCHEMICAL PROPERTIES OF FRUCTAN FRACTIONS OF Agave tequilana cv. cenizo

The physico-mechanical properties of fructan fractions in different agave species without Tequila Denomination of Origin (DOT) need to be studied to identify and expand industrial applications. The rheological and physicochemical characterization of three fractions of Agave tequilana cv. cenizo fructans without DOT, with different degree of polymerization (DP) was carried out to propose their use as an additive in the food industry. Fractions were obtained by apparent DP enrichment (DPa) by stepwise ultradiafiltration with 10, 5 and 1 kilodalton (kDa) membranes and classified on the basis of the enriched fraction evidenced by HPLC profiling with amperometric detector. The ultradiafiltrate of the membrane with 10 kDa, called High Degree of Polymerization (HDP), showed enrichment of fructans with high DPa ≥ 30, the one with 5 kDa called Intermediate Degree of Polymerization (IDP), presents enrichment in DPa between 10 to 30, these fractions dried by spray, showed a modal particle size distribution (D [4,3] < 20 µm). In the ultradiafiltrate of the 1 kDa membrane, called Low Polymerization Grade (LDP), fructo-oligosaccharides (FOS) and fructans with maximum DPa of 15 were enriched; this sample was concentrated to 72 °Brix. The glass transition (Tg) showed a DPa-dependent increase (LDP = 152.17 °C, IDP = 216.12 °C and HDP = 227.5 °C). Viscosity was dependent on the degree of polymerization, exhibiting thermo-mechanically stable flow behavior. The reconstituted powders exhibited Newtonian and flow-stable behavior in a concentration range of 2-50 %, temperature of 5-45 °C and pH of 2-9. The macro and micro structural properties identified in the respective fractions of agave fructans, diversify possible applications with potential interest as encapsulating material, stabilizer and prebiotic sweetener, among others that agave fructans have in the food and nutraceutical industry.