利用主动夹具改善加工中的抗振性

Q3 Engineering

International Journal of Mechanics and Control Pub Date : 2012-03-23 DOI:10.7494/MECH.2012.31.1.51

A. Parus, B. Powałka

{"title":"利用主动夹具改善加工中的抗振性","authors":"A. Parus, B. Powałka","doi":"10.7494/MECH.2012.31.1.51","DOIUrl":null,"url":null,"abstract":"In this paper the results of simulation of vibration suppression during machining are presented. Two versions of the active clamp system were examined. In the case when the work-piece vibration dominates one direction, the active clamp system with 1 degree of freedom (1-DOF) can be used. Also, a 2-DOF sys-tem is proposed to show the effectiveness of the active clamp system for a complex vibration scenario.","PeriodicalId":38333,"journal":{"name":"International Journal of Mechanics and Control","volume":"98 5","pages":"51-56"},"PeriodicalIF":0.0000,"publicationDate":"2012-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"VIBROSTABILITY IMPROVEMENT USING THE ACTIVE CLAMP IN MACHINING\",\"authors\":\"A. Parus, B. Powałka\",\"doi\":\"10.7494/MECH.2012.31.1.51\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper the results of simulation of vibration suppression during machining are presented. Two versions of the active clamp system were examined. In the case when the work-piece vibration dominates one direction, the active clamp system with 1 degree of freedom (1-DOF) can be used. Also, a 2-DOF sys-tem is proposed to show the effectiveness of the active clamp system for a complex vibration scenario.\",\"PeriodicalId\":38333,\"journal\":{\"name\":\"International Journal of Mechanics and Control\",\"volume\":\"98 5\",\"pages\":\"51-56\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-03-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Mechanics and Control\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.7494/MECH.2012.31.1.51\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanics and Control","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.7494/MECH.2012.31.1.51","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

摘要

本文给出了加工过程中振动抑制的仿真结果。两种版本的主动夹紧系统进行了检查。在工件振动占一个方向主导的情况下，可以采用1自由度的主动夹紧系统。此外，还提出了一个二自由度系统，以证明主动夹紧系统在复杂振动情况下的有效性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

VIBROSTABILITY IMPROVEMENT USING THE ACTIVE CLAMP IN MACHINING

In this paper the results of simulation of vibration suppression during machining are presented. Two versions of the active clamp system were examined. In the case when the work-piece vibration dominates one direction, the active clamp system with 1 degree of freedom (1-DOF) can be used. Also, a 2-DOF sys-tem is proposed to show the effectiveness of the active clamp system for a complex vibration scenario.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Mechanics and Control Engineering-Computational Mechanics

CiteScore

2.10

自引率

0.00%

发文量