泥炭土运输过程中树桩根系对车辙形成的影响

IF 2.7 2区 农林科学 Q1 FORESTRY
Maxim Piskuno
{"title":"泥炭土运输过程中树桩根系对车辙形成的影响","authors":"Maxim Piskuno","doi":"10.5552/crojfe.2023.2116","DOIUrl":null,"url":null,"abstract":"To explain the soil deformation processes under the influence of logging machines, average values of various indicators are often used. One of these indicators is the rut depth formed during tractor passages. The average values do not fully describe the consequences of passages on the skidding trails, for example, the rut depth varies along the track. This variability includes both random and regular components. The stump-root systems of trees located on the skidding trail and along its border act as a factor that introduces a pattern. To determine the degree of influence of stumps on 8 sections of skidding trails with the length of 25 and 50 m, located on peat soils (the average mass fraction of water is 82.3%), the rut depth was measured at intervals of 0.5 m and the locations of stumps were noted. The resulting arrays of vertical marks represent the microprofiles of the experimental sections. Measurements were taken after 2 harvester passages and 2 forwarder passages. The stumps were divided into two groups: located inside the tractor track and outside it. Statistical processing of the data showed a wide spread of the rut dimensions in each array. Average values at the sections (standard deviations) in cm were: 21.6(17.7); 30.6(21.6); 37.7(22.7); 46(20.3); 36.4(15.0); 36(15.4); 30.6(21.0); 34(21.0). The autocorrelation functions, constructed for the series of values, showed surges with moderate correlation coefficients on the lags where stumps were noted. An increase in stumps per a length unit of the skidding trail shows an increase in the number of such surges. A decrease in the rut dimensions, in relation to the places where the influence of the roots was absent, averaged: in points 0.5 m away from the stump – 44% (22.6); 1 m away – 32% (20.4); 1.5 m away – 22% (14.2). The spatial influence factor of the roots explains 21% of the variability of the rut dimensions along the skidding trail. The factor of the stump location relative to the track is 19%. The combined influence of these factors is 25%. Further identification of regularities in the rut formation processes is associated both with the continuation of studies of the root system influence, but with the inclusion of factors of the stump size and variety, and with the study of the variability of the soil physical properties along the skidding trails, analysing how this is found in the microprofile structure.","PeriodicalId":55204,"journal":{"name":"Croatian Journal of Forest Engineering","volume":"1 1","pages":""},"PeriodicalIF":2.7000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of Stump-Root System of Trees on Rut Formation During Forwarder Operation on Peat Soils\",\"authors\":\"Maxim Piskuno\",\"doi\":\"10.5552/crojfe.2023.2116\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"To explain the soil deformation processes under the influence of logging machines, average values of various indicators are often used. One of these indicators is the rut depth formed during tractor passages. The average values do not fully describe the consequences of passages on the skidding trails, for example, the rut depth varies along the track. This variability includes both random and regular components. The stump-root systems of trees located on the skidding trail and along its border act as a factor that introduces a pattern. To determine the degree of influence of stumps on 8 sections of skidding trails with the length of 25 and 50 m, located on peat soils (the average mass fraction of water is 82.3%), the rut depth was measured at intervals of 0.5 m and the locations of stumps were noted. The resulting arrays of vertical marks represent the microprofiles of the experimental sections. Measurements were taken after 2 harvester passages and 2 forwarder passages. The stumps were divided into two groups: located inside the tractor track and outside it. Statistical processing of the data showed a wide spread of the rut dimensions in each array. Average values at the sections (standard deviations) in cm were: 21.6(17.7); 30.6(21.6); 37.7(22.7); 46(20.3); 36.4(15.0); 36(15.4); 30.6(21.0); 34(21.0). The autocorrelation functions, constructed for the series of values, showed surges with moderate correlation coefficients on the lags where stumps were noted. An increase in stumps per a length unit of the skidding trail shows an increase in the number of such surges. A decrease in the rut dimensions, in relation to the places where the influence of the roots was absent, averaged: in points 0.5 m away from the stump – 44% (22.6); 1 m away – 32% (20.4); 1.5 m away – 22% (14.2). The spatial influence factor of the roots explains 21% of the variability of the rut dimensions along the skidding trail. The factor of the stump location relative to the track is 19%. The combined influence of these factors is 25%. Further identification of regularities in the rut formation processes is associated both with the continuation of studies of the root system influence, but with the inclusion of factors of the stump size and variety, and with the study of the variability of the soil physical properties along the skidding trails, analysing how this is found in the microprofile structure.\",\"PeriodicalId\":55204,\"journal\":{\"name\":\"Croatian Journal of Forest Engineering\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Croatian Journal of Forest Engineering\",\"FirstCategoryId\":\"97\",\"ListUrlMain\":\"https://doi.org/10.5552/crojfe.2023.2116\",\"RegionNum\":2,\"RegionCategory\":\"农林科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"FORESTRY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Croatian Journal of Forest Engineering","FirstCategoryId":"97","ListUrlMain":"https://doi.org/10.5552/crojfe.2023.2116","RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

摘要

为了解释录井机作用下的土壤变形过程,通常采用各种指标的平均值。这些指标之一是在拖拉机通道形成的车辙深度。平均值并不能完全描述滑道上通道的后果,例如,车辙深度沿着赛道变化。这种可变性包括随机成分和规则成分。树木的树桩根系位于滑道上及其边界,是引入一种模式的因素。为了确定树桩对泥炭土(水的平均质量分数为82.3%)上长度为25和50 m的8段滑道的影响程度,以0.5 m为间隔测量车辙深度,并记录树桩的位置。由此产生的垂直标记阵列代表了实验剖面的微观剖面。在2个收割机通道和2个货代通道后进行测量。树桩被分成两组:位于拖拉机轨道内和外部。数据的统计处理表明,车辙尺寸在每个阵列中分布广泛。各切片平均值(标准差)为:21.6(17.7)cm;30.6 (21.6);37.7 (22.7);46 (20.3);36.4 (15.0);36 (15.4);30.6 (21.0);34(21.0)。为一系列值构建的自相关函数显示,在注意到残桩的滞后上,具有中等相关系数的浪涌。每单位长度的滑行轨迹的残桩数的增加表明这种突波的数量增加。相对于不受树根影响的地方,车辙尺寸的减少平均为:在距离树桩0.5 m的地方- 44% (22.6);1米远- 32% (20.4);1.5米远- 22%(14.2)。根的空间影响因子解释了沿滑道车辙尺寸变化的21%。树桩位置相对于轨道的因子为19%。这些因素的综合影响为25%。进一步确定车辙形成过程的规律性,既要继续研究根系的影响,但也要包括树桩大小和品种的因素,还要研究沿滑道的土壤物理性质的可变性,分析这是如何在微剖面结构中发现的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Influence of Stump-Root System of Trees on Rut Formation During Forwarder Operation on Peat Soils
To explain the soil deformation processes under the influence of logging machines, average values of various indicators are often used. One of these indicators is the rut depth formed during tractor passages. The average values do not fully describe the consequences of passages on the skidding trails, for example, the rut depth varies along the track. This variability includes both random and regular components. The stump-root systems of trees located on the skidding trail and along its border act as a factor that introduces a pattern. To determine the degree of influence of stumps on 8 sections of skidding trails with the length of 25 and 50 m, located on peat soils (the average mass fraction of water is 82.3%), the rut depth was measured at intervals of 0.5 m and the locations of stumps were noted. The resulting arrays of vertical marks represent the microprofiles of the experimental sections. Measurements were taken after 2 harvester passages and 2 forwarder passages. The stumps were divided into two groups: located inside the tractor track and outside it. Statistical processing of the data showed a wide spread of the rut dimensions in each array. Average values at the sections (standard deviations) in cm were: 21.6(17.7); 30.6(21.6); 37.7(22.7); 46(20.3); 36.4(15.0); 36(15.4); 30.6(21.0); 34(21.0). The autocorrelation functions, constructed for the series of values, showed surges with moderate correlation coefficients on the lags where stumps were noted. An increase in stumps per a length unit of the skidding trail shows an increase in the number of such surges. A decrease in the rut dimensions, in relation to the places where the influence of the roots was absent, averaged: in points 0.5 m away from the stump – 44% (22.6); 1 m away – 32% (20.4); 1.5 m away – 22% (14.2). The spatial influence factor of the roots explains 21% of the variability of the rut dimensions along the skidding trail. The factor of the stump location relative to the track is 19%. The combined influence of these factors is 25%. Further identification of regularities in the rut formation processes is associated both with the continuation of studies of the root system influence, but with the inclusion of factors of the stump size and variety, and with the study of the variability of the soil physical properties along the skidding trails, analysing how this is found in the microprofile structure.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
5.20
自引率
12.50%
发文量
23
审稿时长
>12 weeks
期刊介绍: Croatian Journal of Forest Engineering (CROJFE) is a refereed journal distributed internationally, publishing original research articles concerning forest engineering, both theoretical and empirical. The journal covers all aspects of forest engineering research, ranging from basic to applied subjects. In addition to research articles, preliminary research notes and subject reviews are published. Journal Subjects and Fields: -Harvesting systems and technologies- Forest biomass and carbon sequestration- Forest road network planning, management and construction- System organization and forest operations- IT technologies and remote sensing- Engineering in urban forestry- Vehicle/machine design and evaluation- Modelling and sustainable management- Eco-efficient technologies in forestry- Ergonomics and work safety
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信