E. A. Duda, S. Soares, D. Buzzatti, G. Lemos, Tárique Hernandez Schneider, H. P. Cardoso, T. Falcade, A. Reguly
{"title":"搅拌摩擦焊接AA 5083铝合金的电偶腐蚀研究","authors":"E. A. Duda, S. Soares, D. Buzzatti, G. Lemos, Tárique Hernandez Schneider, H. P. Cardoso, T. Falcade, A. Reguly","doi":"10.4322/2176-1523.20222751","DOIUrl":null,"url":null,"abstract":"Friction-stir welding (FSW) is a well-known solid-state technology for manufacturing high-quality aluminum welds. However, corrosion may become an issue due to the changes in the microstructure within the stir zone, perhaps creating a local galvanic couple. In this work, AA 5083-O aluminum plates were joined by FSW, and corrosion analyzes were undertaken. Therefore, corrosion behavior was investigated using an immersion test, open circuit potential (OCP), and zero-resistance ammeter (ZRA) measurements. The stirred material was found to be more resistant to pitting nucleation than the AA5083-O alloy base material on immersion test and OCP analyzes. Nevertheless, deeper pits were more significant in the stirred material. The ZRA test showed similar results for both regions, indicating this system’s low galvanic couple effect.","PeriodicalId":53327,"journal":{"name":"Tecnologia em Metalurgia Materiais e Mineracao","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"An investigation on galvanic corrosion in frictionstir-welded AA 5083 aluminum alloy\",\"authors\":\"E. A. Duda, S. Soares, D. Buzzatti, G. Lemos, Tárique Hernandez Schneider, H. P. Cardoso, T. Falcade, A. Reguly\",\"doi\":\"10.4322/2176-1523.20222751\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Friction-stir welding (FSW) is a well-known solid-state technology for manufacturing high-quality aluminum welds. However, corrosion may become an issue due to the changes in the microstructure within the stir zone, perhaps creating a local galvanic couple. In this work, AA 5083-O aluminum plates were joined by FSW, and corrosion analyzes were undertaken. Therefore, corrosion behavior was investigated using an immersion test, open circuit potential (OCP), and zero-resistance ammeter (ZRA) measurements. The stirred material was found to be more resistant to pitting nucleation than the AA5083-O alloy base material on immersion test and OCP analyzes. Nevertheless, deeper pits were more significant in the stirred material. The ZRA test showed similar results for both regions, indicating this system’s low galvanic couple effect.\",\"PeriodicalId\":53327,\"journal\":{\"name\":\"Tecnologia em Metalurgia Materiais e Mineracao\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tecnologia em Metalurgia Materiais e Mineracao\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4322/2176-1523.20222751\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tecnologia em Metalurgia Materiais e Mineracao","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4322/2176-1523.20222751","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
An investigation on galvanic corrosion in frictionstir-welded AA 5083 aluminum alloy
Friction-stir welding (FSW) is a well-known solid-state technology for manufacturing high-quality aluminum welds. However, corrosion may become an issue due to the changes in the microstructure within the stir zone, perhaps creating a local galvanic couple. In this work, AA 5083-O aluminum plates were joined by FSW, and corrosion analyzes were undertaken. Therefore, corrosion behavior was investigated using an immersion test, open circuit potential (OCP), and zero-resistance ammeter (ZRA) measurements. The stirred material was found to be more resistant to pitting nucleation than the AA5083-O alloy base material on immersion test and OCP analyzes. Nevertheless, deeper pits were more significant in the stirred material. The ZRA test showed similar results for both regions, indicating this system’s low galvanic couple effect.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
