不同干燥条件下粘土-秸秆建筑涂饰层的试验研究

T. Tamošiūnas, Romas Girkontas, A. Savickas, Š. Skuodis, L. Míča
{"title":"不同干燥条件下粘土-秸秆建筑涂饰层的试验研究","authors":"T. Tamošiūnas, Romas Girkontas, A. Savickas, Š. Skuodis, L. Míča","doi":"10.3846/2029882X.2016.1188736","DOIUrl":null,"url":null,"abstract":"AbstractThis manuscript represents investigation of six different clay mixtures under variable drying conditions, namely: bright yellow clay (typical for Lithuania), brown clay (Lithuania Sergėnai district), mixture of different clays, white Spanish clay, clay mass which is resistant for thermal coldness (with synthetic cardigan) and Lithuanian coarse clay with granite additives. Drying process was provided imitating natural drying process and fast drying in drying oven at 110 C°. The main idea of this study – imitate clay and clay-straw buildings drying process and to determine which of used clay types had smallest volumetric and linear deformations. Volumetric and linear deformations for clay-straw buildings is one of the most important factors evaluating cracking in this type of buildings. To reach this purpose six tiles of different clay types were used. Before drying stage water content, plasticity, and liquid limits index, respectively was determined for all types of clay. All clay tiles volumetric ...","PeriodicalId":11839,"journal":{"name":"Engineering Structures and Technologies","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2016-07-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3846/2029882X.2016.1188736","citationCount":"0","resultStr":"{\"title\":\"Experimental investigation of clay-straw building finishing layer under different drying conditions\",\"authors\":\"T. Tamošiūnas, Romas Girkontas, A. Savickas, Š. Skuodis, L. Míča\",\"doi\":\"10.3846/2029882X.2016.1188736\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"AbstractThis manuscript represents investigation of six different clay mixtures under variable drying conditions, namely: bright yellow clay (typical for Lithuania), brown clay (Lithuania Sergėnai district), mixture of different clays, white Spanish clay, clay mass which is resistant for thermal coldness (with synthetic cardigan) and Lithuanian coarse clay with granite additives. Drying process was provided imitating natural drying process and fast drying in drying oven at 110 C°. The main idea of this study – imitate clay and clay-straw buildings drying process and to determine which of used clay types had smallest volumetric and linear deformations. Volumetric and linear deformations for clay-straw buildings is one of the most important factors evaluating cracking in this type of buildings. To reach this purpose six tiles of different clay types were used. Before drying stage water content, plasticity, and liquid limits index, respectively was determined for all types of clay. All clay tiles volumetric ...\",\"PeriodicalId\":11839,\"journal\":{\"name\":\"Engineering Structures and Technologies\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-07-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.3846/2029882X.2016.1188736\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Engineering Structures and Technologies\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3846/2029882X.2016.1188736\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Structures and Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3846/2029882X.2016.1188736","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

摘要本文研究了六种不同干燥条件下的粘土混合物,即:亮黄色粘土(典型的立陶宛)、棕色粘土(立陶宛Sergėnai地区)、不同粘土的混合物、白色西班牙粘土、抗冷粘土块(含合成羊毛衫)和立陶宛含花岗岩添加剂的粗粘土。模拟自然干燥过程,在110℃的干燥箱中快速干燥。本研究的主要思想是模拟粘土和粘土秸秆建筑的干燥过程,并确定哪种使用的粘土类型具有最小的体积和线性变形。粘土-秸秆建筑的体积和线性变形是评价这类建筑开裂的最重要因素之一。为了达到这个目的,使用了六种不同粘土类型的瓦片。在干燥阶段前分别测定了各类粘土的含水量、塑性和液限指数。所有粘土瓦体积…
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Experimental investigation of clay-straw building finishing layer under different drying conditions
AbstractThis manuscript represents investigation of six different clay mixtures under variable drying conditions, namely: bright yellow clay (typical for Lithuania), brown clay (Lithuania Sergėnai district), mixture of different clays, white Spanish clay, clay mass which is resistant for thermal coldness (with synthetic cardigan) and Lithuanian coarse clay with granite additives. Drying process was provided imitating natural drying process and fast drying in drying oven at 110 C°. The main idea of this study – imitate clay and clay-straw buildings drying process and to determine which of used clay types had smallest volumetric and linear deformations. Volumetric and linear deformations for clay-straw buildings is one of the most important factors evaluating cracking in this type of buildings. To reach this purpose six tiles of different clay types were used. Before drying stage water content, plasticity, and liquid limits index, respectively was determined for all types of clay. All clay tiles volumetric ...
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
2
审稿时长
15 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信