{"title":"人工粗化太阳能空气加热器的热性能改善","authors":"N. M. Bader, K. S. Mushatet","doi":"10.30765/er.2036","DOIUrl":null,"url":null,"abstract":"Solar air heaters are useful because they can lessen the need for fossil fuel–powered electricity, thereby lowering emissions and cutting down on energy costs. Experiments were conducted to inspect the thermal performance of a solar air heater with combined ribs and delta-winglet in a single-pass solar air heater. The present goal was boost the thermal performance of a solar air collector. A constant relative roughness height ratio of 0.6 was used to organize eight delta-winglets and seven rectangular ribs on the absorber duct's bottom surface. The attack angles for both winglets and ribs were maintained at 60° and 90°, respectively. The winglet vortex generators were set in a common flow-down configuration with a pitch ratio of 10. This experimental investigation was performed at a mass flow rate of 0.022 kg/s with typical ranges of solar irradiance from 330 W/m2 to 850 W/m2. Results show that the useful energy and thermal efficiency were enhanced by 19.2% and 21.2%, respectively, at maximum solar irradiance compared to a smooth duct. The considered compound ribs and vortex generators affect the temperature of the outlet air, resulting in a considerable improvement in the heat transfer convective rate.","PeriodicalId":44022,"journal":{"name":"Engineering Review","volume":null,"pages":null},"PeriodicalIF":0.7000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Thermal performance improvement of artificially roughened solar air heater\",\"authors\":\"N. M. Bader, K. S. Mushatet\",\"doi\":\"10.30765/er.2036\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Solar air heaters are useful because they can lessen the need for fossil fuel–powered electricity, thereby lowering emissions and cutting down on energy costs. Experiments were conducted to inspect the thermal performance of a solar air heater with combined ribs and delta-winglet in a single-pass solar air heater. The present goal was boost the thermal performance of a solar air collector. A constant relative roughness height ratio of 0.6 was used to organize eight delta-winglets and seven rectangular ribs on the absorber duct's bottom surface. The attack angles for both winglets and ribs were maintained at 60° and 90°, respectively. The winglet vortex generators were set in a common flow-down configuration with a pitch ratio of 10. This experimental investigation was performed at a mass flow rate of 0.022 kg/s with typical ranges of solar irradiance from 330 W/m2 to 850 W/m2. Results show that the useful energy and thermal efficiency were enhanced by 19.2% and 21.2%, respectively, at maximum solar irradiance compared to a smooth duct. The considered compound ribs and vortex generators affect the temperature of the outlet air, resulting in a considerable improvement in the heat transfer convective rate.\",\"PeriodicalId\":44022,\"journal\":{\"name\":\"Engineering Review\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.7000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Engineering Review\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.30765/er.2036\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Review","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30765/er.2036","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
Thermal performance improvement of artificially roughened solar air heater
Solar air heaters are useful because they can lessen the need for fossil fuel–powered electricity, thereby lowering emissions and cutting down on energy costs. Experiments were conducted to inspect the thermal performance of a solar air heater with combined ribs and delta-winglet in a single-pass solar air heater. The present goal was boost the thermal performance of a solar air collector. A constant relative roughness height ratio of 0.6 was used to organize eight delta-winglets and seven rectangular ribs on the absorber duct's bottom surface. The attack angles for both winglets and ribs were maintained at 60° and 90°, respectively. The winglet vortex generators were set in a common flow-down configuration with a pitch ratio of 10. This experimental investigation was performed at a mass flow rate of 0.022 kg/s with typical ranges of solar irradiance from 330 W/m2 to 850 W/m2. Results show that the useful energy and thermal efficiency were enhanced by 19.2% and 21.2%, respectively, at maximum solar irradiance compared to a smooth duct. The considered compound ribs and vortex generators affect the temperature of the outlet air, resulting in a considerable improvement in the heat transfer convective rate.
期刊介绍:
Engineering Review is an international journal designed to foster the exchange of ideas and transfer of knowledge between scientists and engineers involved in various engineering sciences that deal with investigations related to design, materials, technology, maintenance and manufacturing processes. It is not limited to the specific details of science and engineering but is instead devoted to a very wide range of subfields in the engineering sciences. It provides an appropriate resort for publishing the papers covering prior applications – based on the research topics comprising the entire engineering spectrum. Topics of particular interest thus include: mechanical engineering, naval architecture and marine engineering, fundamental engineering sciences, electrical engineering, computer sciences and civil engineering. Manuscripts addressing other issues may also be considered if they relate to engineering oriented subjects. The contributions, which may be analytical, numerical or experimental, should be of significance to the progress of mentioned topics. Papers that are merely illustrations of established principles or procedures generally will not be accepted. Occasionally, the magazine is ready to publish high-quality-selected papers from the conference after being renovated, expanded and written in accordance with the rules of the magazine. The high standard of excellence for any of published papers will be ensured by peer-review procedure. The journal takes into consideration only original scientific papers.