填充模式对3d打印零件抗压强度的影响

IF 0.7 Q3 ENGINEERING, MULTIDISCIPLINARY

TEHNICKI GLASNIK-TECHNICAL JOURNAL Pub Date : 2022-06-23 DOI:10.31803/tg-20220413112955

D. Godec, Karlo Križetić, A. Pilipović

{"title":"填充模式对3d打印零件抗压强度的影响","authors":"D. Godec, Karlo Križetić, A. Pilipović","doi":"10.31803/tg-20220413112955","DOIUrl":null,"url":null,"abstract":"Article presents analysis of the influence of infill pattern on 3D printed parts compression properties. Most of the researches from this field covered tensile 3D-printed parts properties, but for some applications compression mechanical properties are far more important. For the analysis of compression strength, 3D-printed specimens were produced by Fused Filament Fabrication (FFF) process from acrylonitrile butadiene styrene (ABS) with different shapes of infill pattern. Testing results showed that honeycomb infill pattern results with the highest compression strength. Unexpected result was the lowest compression strength of gyroid infill pattern, which must be more deeply investigated.","PeriodicalId":43419,"journal":{"name":"TEHNICKI GLASNIK-TECHNICAL JOURNAL","volume":"1 1","pages":""},"PeriodicalIF":0.7000,"publicationDate":"2022-06-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of Infill Pattern on 3D-Printed Parts Compression Strength\",\"authors\":\"D. Godec, Karlo Križetić, A. Pilipović\",\"doi\":\"10.31803/tg-20220413112955\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Article presents analysis of the influence of infill pattern on 3D printed parts compression properties. Most of the researches from this field covered tensile 3D-printed parts properties, but for some applications compression mechanical properties are far more important. For the analysis of compression strength, 3D-printed specimens were produced by Fused Filament Fabrication (FFF) process from acrylonitrile butadiene styrene (ABS) with different shapes of infill pattern. Testing results showed that honeycomb infill pattern results with the highest compression strength. Unexpected result was the lowest compression strength of gyroid infill pattern, which must be more deeply investigated.\",\"PeriodicalId\":43419,\"journal\":{\"name\":\"TEHNICKI GLASNIK-TECHNICAL JOURNAL\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":0.7000,\"publicationDate\":\"2022-06-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"TEHNICKI GLASNIK-TECHNICAL JOURNAL\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.31803/tg-20220413112955\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"TEHNICKI GLASNIK-TECHNICAL JOURNAL","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31803/tg-20220413112955","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

分析了填充方式对3D打印件压缩性能的影响。该领域的大多数研究涵盖了拉伸3d打印部件的性能，但对于某些应用，压缩力学性能更为重要。采用丙烯腈-丁二烯-苯乙烯(ABS)为原料，采用熔融长丝制备(FFF)工艺制作了具有不同形状填充图案的3d打印试样，用于抗压强度分析。试验结果表明，蜂窝填充模式具有最高的抗压强度。没想到的是，回转线填充模式的抗压强度最低，这一点有待进一步深入研究。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Influence of Infill Pattern on 3D-Printed Parts Compression Strength

Article presents analysis of the influence of infill pattern on 3D printed parts compression properties. Most of the researches from this field covered tensile 3D-printed parts properties, but for some applications compression mechanical properties are far more important. For the analysis of compression strength, 3D-printed specimens were produced by Fused Filament Fabrication (FFF) process from acrylonitrile butadiene styrene (ABS) with different shapes of infill pattern. Testing results showed that honeycomb infill pattern results with the highest compression strength. Unexpected result was the lowest compression strength of gyroid infill pattern, which must be more deeply investigated.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

TEHNICKI GLASNIK-TECHNICAL JOURNAL ENGINEERING, MULTIDISCIPLINARY-

CiteScore

1.50

自引率

8.30%

发文量

审稿时长

15 weeks