Comparative evaluation of design codes for buckling assessment of a steel spherical shell

This work focuses on the comparative evaluation of the buckling capacity of steel spherical shells subjected to external pressure with existing design codes. The recorded experimental data of buckled spherical shells are compared with the calculated buckling pressure using design codes such as (i) European Convention for Constructional Steelwork (ECCS), (ii) Det Norske Veritas (DnV), (iii) British Standard (PD 5500) and (iv) American Bureau of Shipping (ABS). The selected experimental data are widely used in industrial applications. The experimental data are categorised as 'thin-shell', 'moderate-shell' and 'thick-shell' and reviewed against selected design codes. The comparative analysis clearly shows that the DnV design code with a deviation of 3.6% is well suited to estimate the buckling capacity of 'thick shells", while PD 5500 with a deviation of 9% to 50% is better suited for "medium and thin' shells. On the other hand, statistical analysis shows that PD 5500 is close to 1.0 with the value of COV (i.e., 1.281 and 9.383%). Further analysis of 28 steel spherical shell test data is performed and compared with the plotted curves in the format of PD 5500 and ECCS. The result shows that 3 test data are below the lower limit curve specified in the design guideline for ECCS, indicating that PD 5500 is the more conservative design guideline.