Numerical investigation of atomisation using a hybrid Eulerian-Lagrangian solver

: This study investigates the potential of a newly released multi-phase solver to simulate atomization in an air-blast type atomizer. The "VOF-to-DPM" solver was used to simulate primary and secondary atomization in an atomizer with a coaxial injector-like geometry. The solver uses a hybrid Eulerian/Eulerian-Lagrangian formulation with geometric transition criteria between the two models. The conducted study assumed isothermal, non-reacting flow at room temperature. The primary focus was predicting Sauter Mean Diameter and droplet velocity data at a sampling plane downstream of the injection site. The results showed that the solver is able to produce the expected data and to predict trends similar to those found in experimental measurements. The accuracy of the produced droplet diameters was roughly a factor 2 off compared to experiment. This is attributed primarily to mesh resolution. It was concluded that the solver has the potential to predict atomization at a reasonable computational cost, but further study is needed to confirm its full capabilities.