5G独立带间载波聚合性能分析

Q3 Engineering

Journal of Communications Pub Date : 2021-01-01 DOI:10.12720/jcm.16.11.492-499

A. Hikmaturokhman, Levina Anora, Solichah Larasati, A. Sukarno, Rizky Syafrullah, Khoirun Ni’amah

{"title":"5G独立带间载波聚合性能分析","authors":"A. Hikmaturokhman, Levina Anora, Solichah Larasati, A. Sukarno, Rizky Syafrullah, Khoirun Ni’amah","doi":"10.12720/jcm.16.11.492-499","DOIUrl":null,"url":null,"abstract":"Today, high data rate is the prior requirement to support services and applications. It is definitely a challenge for the 5G New Radio (NR) in providing high data rates, in order to support use cases, especially enhanced Mobile Broadband (eMBB). The objective of this research is to design a 5G network which has greater data rates employing carrier aggregation techniques. Carrier Aggregation (CA) is a way which is able to improve data rates by aggregate component carriers, hence, it can make a wider bandwidth. There are three modes of CA scenario that can be used: intra-band contiguous CA, intra-band non-contiguous CA, and inter-band noncontiguous CA. In this research, the 5G network planning with carrier aggregation on inter-band employing bandwidth 40 MHz at frequency 2300 MHz and bandwidth 100 MHz at frequency 3500 MHz was simulated in Mentum Planet software. The simulation implemented at Marunda Center Industrial Area in Bekasi used downlink outdoor-to-indoor (O2I) with Line of Sight (LOS) scenario. The parameters analyzed in this research employed three main parameters: SS-RSRP, SS-SINR and data rate, which resulted CA SS-RSRP increased by 0.14%, SSSINR increased by 4.48%, and peak data rate increased up to 1412.26 Mbps from 312.872 Mbps","PeriodicalId":53518,"journal":{"name":"Journal of Communications","volume":"16 1","pages":"492-499"},"PeriodicalIF":0.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Performance Analysis of 5G Stand Alone Inter-band Carrier Aggregation\",\"authors\":\"A. Hikmaturokhman, Levina Anora, Solichah Larasati, A. Sukarno, Rizky Syafrullah, Khoirun Ni’amah\",\"doi\":\"10.12720/jcm.16.11.492-499\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Today, high data rate is the prior requirement to support services and applications. It is definitely a challenge for the 5G New Radio (NR) in providing high data rates, in order to support use cases, especially enhanced Mobile Broadband (eMBB). The objective of this research is to design a 5G network which has greater data rates employing carrier aggregation techniques. Carrier Aggregation (CA) is a way which is able to improve data rates by aggregate component carriers, hence, it can make a wider bandwidth. There are three modes of CA scenario that can be used: intra-band contiguous CA, intra-band non-contiguous CA, and inter-band noncontiguous CA. In this research, the 5G network planning with carrier aggregation on inter-band employing bandwidth 40 MHz at frequency 2300 MHz and bandwidth 100 MHz at frequency 3500 MHz was simulated in Mentum Planet software. The simulation implemented at Marunda Center Industrial Area in Bekasi used downlink outdoor-to-indoor (O2I) with Line of Sight (LOS) scenario. The parameters analyzed in this research employed three main parameters: SS-RSRP, SS-SINR and data rate, which resulted CA SS-RSRP increased by 0.14%, SSSINR increased by 4.48%, and peak data rate increased up to 1412.26 Mbps from 312.872 Mbps\",\"PeriodicalId\":53518,\"journal\":{\"name\":\"Journal of Communications\",\"volume\":\"16 1\",\"pages\":\"492-499\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Communications\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.12720/jcm.16.11.492-499\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Communications","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.12720/jcm.16.11.492-499","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 1

摘要

今天，高数据速率是支持服务和应用程序的首要要求。为了支持用例，特别是增强型移动宽带(eMBB)， 5G新无线电(NR)在提供高数据速率方面无疑是一个挑战。本研究的目标是设计一个采用载波聚合技术具有更高数据速率的5G网络。载波聚合(Carrier Aggregation, CA)是一种通过聚合分量载波来提高数据速率的方法，因此可以产生更宽的带宽。CA场景可采用三种模式:带内连续CA、带内不连续CA和带间不连续CA。本研究在Mentum Planet软件中模拟了2300mhz频率下带宽为40mhz、3500mhz频率下带宽为100mhz的带间载波聚合5G网络规划。在Bekasi的Marunda中心工业区实施的模拟使用了带有视线(LOS)场景的下行室外到室内(O2I)。本研究采用SS-RSRP、SS-SINR和数据速率三个主要参数进行参数分析，结果表明CA的SS-RSRP提高了0.14%，SSSINR提高了4.48%，峰值数据速率从312.872 Mbps提高到1412.26 Mbps

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Performance Analysis of 5G Stand Alone Inter-band Carrier Aggregation

Today, high data rate is the prior requirement to support services and applications. It is definitely a challenge for the 5G New Radio (NR) in providing high data rates, in order to support use cases, especially enhanced Mobile Broadband (eMBB). The objective of this research is to design a 5G network which has greater data rates employing carrier aggregation techniques. Carrier Aggregation (CA) is a way which is able to improve data rates by aggregate component carriers, hence, it can make a wider bandwidth. There are three modes of CA scenario that can be used: intra-band contiguous CA, intra-band non-contiguous CA, and inter-band noncontiguous CA. In this research, the 5G network planning with carrier aggregation on inter-band employing bandwidth 40 MHz at frequency 2300 MHz and bandwidth 100 MHz at frequency 3500 MHz was simulated in Mentum Planet software. The simulation implemented at Marunda Center Industrial Area in Bekasi used downlink outdoor-to-indoor (O2I) with Line of Sight (LOS) scenario. The parameters analyzed in this research employed three main parameters: SS-RSRP, SS-SINR and data rate, which resulted CA SS-RSRP increased by 0.14%, SSSINR increased by 4.48%, and peak data rate increased up to 1412.26 Mbps from 312.872 Mbps

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Communications Engineering-Electrical and Electronic Engineering

CiteScore

3.40

自引率

0.00%

发文量

期刊介绍： JCM is a scholarly peer-reviewed international scientific journal published monthly, focusing on theories, systems, methods, algorithms and applications in communications. It provide a high profile, leading edge forum for academic researchers, industrial professionals, engineers, consultants, managers, educators and policy makers working in the field to contribute and disseminate innovative new work on communications. All papers will be blind reviewed and accepted papers will be published monthly which is available online (open access) and in printed version.