{"title":"利用高ε介电粒子与自由空间阻抗匹配增强三维准各向同性超材料金属网导线的电感","authors":"Takuya Yamaguchi, T. Ishiyama, T. Ueda, T. Itoh","doi":"10.1051/epjam/2019019","DOIUrl":null,"url":null,"abstract":"In this paper, we consider cube-shaped unit cells including high-ε dielectric cubes under magnetic dipole-like resonance placed at the center and metallic mesh wires for negative permittivity to construct three-dimensional quasi-isotropic metamaterials in the microwave region. Basically, such structures suffer from their low wave impedance due to inclusion of high-ε materials. To reduce effective permittivity of the composite structures, we propose to insert additional inductance into the metallic mesh. For the insertion of lumped inductors along the wires, dispersion diagram and the Bloch-impedance are numerically estimated, and converted to effective permittivity and permeability. The numerical simulation results clearly show almost 3-D isotropic propagation characteristics in a specific frequency region and enhancement of the Bloch-impedance close to free space in the left-handed region. The lumped inductors are replaced by meander-line strip patterns for practical configurations. The metallic patterned structures also achieve the enhanced Bloch impedance that is well-matched to free space.","PeriodicalId":43689,"journal":{"name":"EPJ Applied Metamaterials","volume":null,"pages":null},"PeriodicalIF":1.5000,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1051/epjam/2019019","citationCount":"1","resultStr":"{\"title\":\"Enhancement of inductance along metallic mesh wires in three-dimensional quasi-isotropic metamaterials using high-ε dielectric particles for impedance-matching with free space\",\"authors\":\"Takuya Yamaguchi, T. Ishiyama, T. Ueda, T. Itoh\",\"doi\":\"10.1051/epjam/2019019\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, we consider cube-shaped unit cells including high-ε dielectric cubes under magnetic dipole-like resonance placed at the center and metallic mesh wires for negative permittivity to construct three-dimensional quasi-isotropic metamaterials in the microwave region. Basically, such structures suffer from their low wave impedance due to inclusion of high-ε materials. To reduce effective permittivity of the composite structures, we propose to insert additional inductance into the metallic mesh. For the insertion of lumped inductors along the wires, dispersion diagram and the Bloch-impedance are numerically estimated, and converted to effective permittivity and permeability. The numerical simulation results clearly show almost 3-D isotropic propagation characteristics in a specific frequency region and enhancement of the Bloch-impedance close to free space in the left-handed region. The lumped inductors are replaced by meander-line strip patterns for practical configurations. The metallic patterned structures also achieve the enhanced Bloch impedance that is well-matched to free space.\",\"PeriodicalId\":43689,\"journal\":{\"name\":\"EPJ Applied Metamaterials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.5000,\"publicationDate\":\"2019-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1051/epjam/2019019\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"EPJ Applied Metamaterials\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1051/epjam/2019019\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"EPJ Applied Metamaterials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1051/epjam/2019019","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Enhancement of inductance along metallic mesh wires in three-dimensional quasi-isotropic metamaterials using high-ε dielectric particles for impedance-matching with free space
In this paper, we consider cube-shaped unit cells including high-ε dielectric cubes under magnetic dipole-like resonance placed at the center and metallic mesh wires for negative permittivity to construct three-dimensional quasi-isotropic metamaterials in the microwave region. Basically, such structures suffer from their low wave impedance due to inclusion of high-ε materials. To reduce effective permittivity of the composite structures, we propose to insert additional inductance into the metallic mesh. For the insertion of lumped inductors along the wires, dispersion diagram and the Bloch-impedance are numerically estimated, and converted to effective permittivity and permeability. The numerical simulation results clearly show almost 3-D isotropic propagation characteristics in a specific frequency region and enhancement of the Bloch-impedance close to free space in the left-handed region. The lumped inductors are replaced by meander-line strip patterns for practical configurations. The metallic patterned structures also achieve the enhanced Bloch impedance that is well-matched to free space.