{"title":"单相Ti4+取代三金红石CoNb2O6陶瓷的合成:弛豫型铁电性和高k介电性的演变","authors":"Neeraj Singh, Kundan Kumar, Preetam Singh","doi":"10.1007/s10832-023-00322-0","DOIUrl":null,"url":null,"abstract":"<div><p>The dielectric constant of material ultimately decides the level of miniaturization in electronic devices based on capacitive components and the development of wireless communications technologies operating at microwave frequencies. Similar to well-known PZT type high <b>k (dielectric constant)</b> Ferroelectrics, Ti<sup>4+</sup> ion doping is tried here in a novel Trirutile CoNb<sub>2</sub>O<sub>6</sub> lattice as smaller Ti<sup>4+</sup> can vibrate from its mean position in Trirutile octahedral resulting in the net polarization in the octahedral that can result in high k dielectricity and overall can turn Trirutile into a new family of ferroelectrics. Single phase Ti substituted Trirutile CoNb<sub>2</sub>O<sub>6</sub> ceramic were synthesized for the first time by solid-state ceramic synthesis route and Phase purity and substitution of Ti<sup>4+</sup> ions in CoNb<sub>2</sub>O<sub>6</sub> Trirutile lattice was confirmed using Powder x-ray diffraction (XRD), Scanning Electron Microscope(SEM), and Energy Dispersive X-ray analysis (EDX), X-ray Photoelectron Spectroscopy (XPS). Both dielectric constant and dielectric loss were decreasing with increasing frequencies. Ti<sup>4+</sup> substitution in the Trirutile CoNb<sub>2</sub>O<sub>6</sub> lattice enhances the dielectric constant of the material. The dielectric constant (ɛ<sub>r</sub>′) for CoNb<sub>2</sub>O<sub>6</sub> was found to be 500, CoNb<sub>1.95</sub>Ti<sub>0.05</sub>O<sub>6</sub> is 700 and CoNb<sub>1.9</sub>Ti<sub>0.1</sub>O<sub>6</sub> is 14,000 respectively at 100 Hz frequency at 200 <sup>o</sup>C and then decreases, it clearly shows the relaxor type behavior. Samples also exhibit ferroelectric behavior with remnant polarization Pr and Vc at 50 Hz frequency equal to 0.05 µC/cm<sup>2</sup> and 8e + 03 V/cm for CoNb<sub>1.95</sub>Ti<sub>0.05</sub>O<sub>6</sub> and 0.05 µC/cm<sup>2</sup> and 10e + 03 V/cm for CoNb<sub>1.9</sub>Ti<sub>0.1</sub>O<sub>6</sub>.</p></div>","PeriodicalId":625,"journal":{"name":"Journal of Electroceramics","volume":"51 2","pages":"133 - 145"},"PeriodicalIF":1.7000,"publicationDate":"2023-07-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Synthesis of single phase Ti4+ substituted Trirutile CoNb2O6 Ceramic: evolution of Relaxor type ferroelectricity and high k dielectricity\",\"authors\":\"Neeraj Singh, Kundan Kumar, Preetam Singh\",\"doi\":\"10.1007/s10832-023-00322-0\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The dielectric constant of material ultimately decides the level of miniaturization in electronic devices based on capacitive components and the development of wireless communications technologies operating at microwave frequencies. Similar to well-known PZT type high <b>k (dielectric constant)</b> Ferroelectrics, Ti<sup>4+</sup> ion doping is tried here in a novel Trirutile CoNb<sub>2</sub>O<sub>6</sub> lattice as smaller Ti<sup>4+</sup> can vibrate from its mean position in Trirutile octahedral resulting in the net polarization in the octahedral that can result in high k dielectricity and overall can turn Trirutile into a new family of ferroelectrics. Single phase Ti substituted Trirutile CoNb<sub>2</sub>O<sub>6</sub> ceramic were synthesized for the first time by solid-state ceramic synthesis route and Phase purity and substitution of Ti<sup>4+</sup> ions in CoNb<sub>2</sub>O<sub>6</sub> Trirutile lattice was confirmed using Powder x-ray diffraction (XRD), Scanning Electron Microscope(SEM), and Energy Dispersive X-ray analysis (EDX), X-ray Photoelectron Spectroscopy (XPS). Both dielectric constant and dielectric loss were decreasing with increasing frequencies. Ti<sup>4+</sup> substitution in the Trirutile CoNb<sub>2</sub>O<sub>6</sub> lattice enhances the dielectric constant of the material. The dielectric constant (ɛ<sub>r</sub>′) for CoNb<sub>2</sub>O<sub>6</sub> was found to be 500, CoNb<sub>1.95</sub>Ti<sub>0.05</sub>O<sub>6</sub> is 700 and CoNb<sub>1.9</sub>Ti<sub>0.1</sub>O<sub>6</sub> is 14,000 respectively at 100 Hz frequency at 200 <sup>o</sup>C and then decreases, it clearly shows the relaxor type behavior. Samples also exhibit ferroelectric behavior with remnant polarization Pr and Vc at 50 Hz frequency equal to 0.05 µC/cm<sup>2</sup> and 8e + 03 V/cm for CoNb<sub>1.95</sub>Ti<sub>0.05</sub>O<sub>6</sub> and 0.05 µC/cm<sup>2</sup> and 10e + 03 V/cm for CoNb<sub>1.9</sub>Ti<sub>0.1</sub>O<sub>6</sub>.</p></div>\",\"PeriodicalId\":625,\"journal\":{\"name\":\"Journal of Electroceramics\",\"volume\":\"51 2\",\"pages\":\"133 - 145\"},\"PeriodicalIF\":1.7000,\"publicationDate\":\"2023-07-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Electroceramics\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s10832-023-00322-0\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Electroceramics","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s10832-023-00322-0","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
Synthesis of single phase Ti4+ substituted Trirutile CoNb2O6 Ceramic: evolution of Relaxor type ferroelectricity and high k dielectricity
The dielectric constant of material ultimately decides the level of miniaturization in electronic devices based on capacitive components and the development of wireless communications technologies operating at microwave frequencies. Similar to well-known PZT type high k (dielectric constant) Ferroelectrics, Ti4+ ion doping is tried here in a novel Trirutile CoNb2O6 lattice as smaller Ti4+ can vibrate from its mean position in Trirutile octahedral resulting in the net polarization in the octahedral that can result in high k dielectricity and overall can turn Trirutile into a new family of ferroelectrics. Single phase Ti substituted Trirutile CoNb2O6 ceramic were synthesized for the first time by solid-state ceramic synthesis route and Phase purity and substitution of Ti4+ ions in CoNb2O6 Trirutile lattice was confirmed using Powder x-ray diffraction (XRD), Scanning Electron Microscope(SEM), and Energy Dispersive X-ray analysis (EDX), X-ray Photoelectron Spectroscopy (XPS). Both dielectric constant and dielectric loss were decreasing with increasing frequencies. Ti4+ substitution in the Trirutile CoNb2O6 lattice enhances the dielectric constant of the material. The dielectric constant (ɛr′) for CoNb2O6 was found to be 500, CoNb1.95Ti0.05O6 is 700 and CoNb1.9Ti0.1O6 is 14,000 respectively at 100 Hz frequency at 200 oC and then decreases, it clearly shows the relaxor type behavior. Samples also exhibit ferroelectric behavior with remnant polarization Pr and Vc at 50 Hz frequency equal to 0.05 µC/cm2 and 8e + 03 V/cm for CoNb1.95Ti0.05O6 and 0.05 µC/cm2 and 10e + 03 V/cm for CoNb1.9Ti0.1O6.
期刊介绍:
While ceramics have traditionally been admired for their mechanical, chemical and thermal stability, their unique electrical, optical and magnetic properties have become of increasing importance in many key technologies including communications, energy conversion and storage, electronics and automation. Electroceramics benefit greatly from their versatility in properties including:
-insulating to metallic and fast ion conductivity
-piezo-, ferro-, and pyro-electricity
-electro- and nonlinear optical properties
-feromagnetism.
When combined with thermal, mechanical, and chemical stability, these properties often render them the materials of choice.
The Journal of Electroceramics is dedicated to providing a forum of discussion cutting across issues in electrical, optical, and magnetic ceramics. Driven by the need for miniaturization, cost, and enhanced functionality, the field of electroceramics is growing rapidly in many new directions. The Journal encourages discussions of resultant trends concerning silicon-electroceramic integration, nanotechnology, ceramic-polymer composites, grain boundary and defect engineering, etc.