{"title":"硅酸盐水泥砂浆中常规细骨料和建筑拆迁废骨料粒径分布的影响","authors":"P. Kruger, P. Serbai, A. Chinelatto, E. Pereira","doi":"10.1590/0366-69132021673833035","DOIUrl":null,"url":null,"abstract":"Recycled aggregates present a varied mineralogical composition and the grading of these particulates over their particle size distribution influence the aggregate properties as well as those of the composites that they form. This study proposed a comparative investigation of the influence of the particle size distribution of fine aggregates from two different origins, namely, natural crushed stone and construction and demolition waste (CDW). Three particle size distributions were defined, so that each aggregate had its fineness modulus (FM) ranked in the granulometric ranges, following the NBR 7211 Brazilian standard. The following tests were carried out: consistency, bulk density in the fresh state, compression strength, absorption (by immersion and capillarity), dimensional and mass variation. The results showed that the aggregate mineralogical composition impacted the mortar properties and that, when analyzed along with the particle size distribution, CDW showed different and varied behavior as a function of its particle size and distribution. Another finding was that mortars produced with CDW aggregate with granulometry below the lower optimal zone (FM<2.20) presented reduced mechanical and physical performance. Therefore, it was concluded that CDW aggregates should not be included in the same standards as conventional aggregates regarding the fine aggregate granulometric composition.","PeriodicalId":9824,"journal":{"name":"Cerâmica","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Influence of particle size distribution of conventional fine aggregate and construction demolition waste aggregate in Portland cement mortar\",\"authors\":\"P. Kruger, P. Serbai, A. Chinelatto, E. Pereira\",\"doi\":\"10.1590/0366-69132021673833035\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Recycled aggregates present a varied mineralogical composition and the grading of these particulates over their particle size distribution influence the aggregate properties as well as those of the composites that they form. This study proposed a comparative investigation of the influence of the particle size distribution of fine aggregates from two different origins, namely, natural crushed stone and construction and demolition waste (CDW). Three particle size distributions were defined, so that each aggregate had its fineness modulus (FM) ranked in the granulometric ranges, following the NBR 7211 Brazilian standard. The following tests were carried out: consistency, bulk density in the fresh state, compression strength, absorption (by immersion and capillarity), dimensional and mass variation. The results showed that the aggregate mineralogical composition impacted the mortar properties and that, when analyzed along with the particle size distribution, CDW showed different and varied behavior as a function of its particle size and distribution. Another finding was that mortars produced with CDW aggregate with granulometry below the lower optimal zone (FM<2.20) presented reduced mechanical and physical performance. Therefore, it was concluded that CDW aggregates should not be included in the same standards as conventional aggregates regarding the fine aggregate granulometric composition.\",\"PeriodicalId\":9824,\"journal\":{\"name\":\"Cerâmica\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Cerâmica\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1590/0366-69132021673833035\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Materials Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Cerâmica","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1590/0366-69132021673833035","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Materials Science","Score":null,"Total":0}
Influence of particle size distribution of conventional fine aggregate and construction demolition waste aggregate in Portland cement mortar
Recycled aggregates present a varied mineralogical composition and the grading of these particulates over their particle size distribution influence the aggregate properties as well as those of the composites that they form. This study proposed a comparative investigation of the influence of the particle size distribution of fine aggregates from two different origins, namely, natural crushed stone and construction and demolition waste (CDW). Three particle size distributions were defined, so that each aggregate had its fineness modulus (FM) ranked in the granulometric ranges, following the NBR 7211 Brazilian standard. The following tests were carried out: consistency, bulk density in the fresh state, compression strength, absorption (by immersion and capillarity), dimensional and mass variation. The results showed that the aggregate mineralogical composition impacted the mortar properties and that, when analyzed along with the particle size distribution, CDW showed different and varied behavior as a function of its particle size and distribution. Another finding was that mortars produced with CDW aggregate with granulometry below the lower optimal zone (FM<2.20) presented reduced mechanical and physical performance. Therefore, it was concluded that CDW aggregates should not be included in the same standards as conventional aggregates regarding the fine aggregate granulometric composition.
期刊介绍:
A Revista Cerâmica, órgão oficial da Associação Brasileira de Cerâmica (ABCERAM) publica contribuições originais de interesse na área de cerâmica, compreendendo arte cerâmica, abrasivos, biocerâmicas, cerâmicas avançadas, cerâmica branca, cerâmica de mesa, cerâmica eletroeletrônica, cerâmica estrutural, cerâmica magnética, cerâmica nuclear, cerâmica óptica, cerâmica química, cerâmica termomecânica, cerâmica vermelha, cimento, compósitos de matriz cerâmica, materiais refratários, materiais de revestimento, matérias-primas, vidrados, vidros e vitrocerâmicas, análise microestrutural, ciência básica, instrumentação, processos de fabricação, síntese de pós, técnicas de caracterização etc.