Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior

Abstract Drilling fluids perform a number of important functions during a drilling operation, including that of lifting drilled cuttings to the surface and balancing formation pressures. Drilling fluids are usually designed to be structured fluids exhibiting shear thinning and yield stress behavior, and most drilling fluids also exhibit thixotropy. Accurate modeling of drilling fluid rheology is necessary for predicting friction pressure losses in the wellbore while circulating, the pump pressure needed to resume circulation after a static period, and how the fluid rheology evolves with time while in static or near-static conditions. Although modeling the flow of thixotropic fluids in realistic geometries is still a formidable future challenge to be solved, considerable insights can still be gained by studying the viscometric flows of such fluids. We report a detailed rheological characterization of a water-based drilling fluid and an invert emulsion oilbased drilling fluid. The micro structure responsible for thixotropy is different in these fluids which results in different thixotropic responses. Measurements are primarily focused at transient responses to step changes in shear rate, but cover also steady state flow curves and stress overshoots during start-up of flow. We analyze the shear rate step change measurements using a structural kinetics thixotropy model.