基于TSNE降维方法和IGWO-LSSVM模型的接触网异常状态检测

Q4 Engineering
Yu Guo, Yi Lingzhi, Wang Yahui, Dong Tengfei, Yu Huang, Shen Haixiang
{"title":"基于TSNE降维方法和IGWO-LSSVM模型的接触网异常状态检测","authors":"Yu Guo, Yi Lingzhi, Wang Yahui, Dong Tengfei, Yu Huang, Shen Haixiang","doi":"10.2174/2212797616666230505151008","DOIUrl":null,"url":null,"abstract":"\n\nCatenary is a crucial component of an electrified railroad's traction power supply system. There is a considerable incidence of abnormal status and failures due to prolonged outside exposure. Driving safety will be directly impacted if an abnormal status or failure occurs. Currently, catenary detection vehicles are the most often utilized technique for gathering data and identifying faults based on manual experience. However, this technology cannot meet the demands of prompt detection and correction of faults in railways engineering due to its extremely low work efficiency.\n\n\n\nBased on the above, an abnormal status detection method of catenary based on the improved gray wolf (IGWO) algorithm optimized the least squares support vector machine (LSSVM) with the t-distributed stochastic neighbor embedding (TSNE) is proposed in this paper. In order to improve the accuracy of catenary abnormal status detection and shorten the detection time.\n\n\n\nFirstly, the TSNE dimensionality reduction technology is used to reduce the original catenary data to three-dimensional space. Then, in order to address the issue that the parameters of the LSSVM detection model are hard to determine, the improved GWO algorithm is used to optimize the penalty factor and kernel parameter in the LSSVM and establish the TSNE-IGWO-LSSVM catenary abnormal status detection model. Finally, contrasting experimental results of different detection models. The T-distributed Stochastic Domain Embedding (TSNE) is an improved nonlinear dimensionality reduction method based on the Stochastic Neighbor Embedding (SNE). TSNE no longer adopts the distance invariance in linear dimensionality reduction methods such as ISOMAP. TSNE is much better than the linear dimensionality reduction method in the reduction degree of the original dimension. The GWO algorithm, which is frequently used in engineering research, has the advantages of a simple model, great generalization capability, and good optimization performance. The premature convergence is one of the remaining flaws. By applying a good point set to initialize the gray wolf population and the nonlinear control parameters, the gray wolf algorithm is improved in this research. The IGWO algorithm effectively makes up for the problem of balancing the local exploitation and global search capabilities of GWO. Additionally, this IGWO algorithm performs the Cauchy variation operation on the current generation optimal solution to improve population diversity, enlarge the search space, and increase the likelihood of the algorithm escaping the local optimal solution in order to prevent the algorithm from failing the local optimum. The Least Squares Support Vector Machine (LSSVM) is an improved version of the Support Vector Machine (SVM), which replaces the original inequality constraint with a linear least squares criterion for the loss function. The kernel parameters of the RBF function and the penalty factor, these two parameters directly determine the detection effect of LSSVM. In this paper, the IGWO is utilized to adjust and determine the LSSVM parameters in order to enhance the detection capacity of the LSSVM model.\n\n\n\nIn this paper, in order to minimize the experiment's bias, the training data and the test data are allocated in a ratio of 4:1, the training data are set to 400 groups, and the test data are set to 100 groups. After training the five models, the test data is used to validate and compare the detection capacity of the models. After each of the five detection models was tested ten times, the TSNE-IGWO-LSSVM model is compared with the IGWO-LSSVM model, the TSNE-FA-LSSVM model, the GWO-LSSVM model, and the GWO-ELM model, the results show that the TSNE-IGWO-LSSVM model has the highest average detection accuracy of 97.1% and the shortest running time of 26.9s. For the root mean squared error (RMSE) and the root mean squared error (RMSE), the TSNE-IGWO-LSSVM model is 0.17320 and 2.51% respectively, which is the best among the five models, indicating that it not only has higher detection accuracy but also better convergence of detection accuracy than the other models.\n\n\n\nWith the thousands of miles of catenary and the complexity of the data, it is crucial to shorten the running time in order to improve the efficiency and ease the burden of the processors. The experiments demonstrate that the TSNE-IGWO-LSSVM detection model can detect the abnormal status of catenary more accurately and quickly, providing a new method for the abnormal status detection of catenary, which has certain application value and engineering significance in the era of fully electrified railways.\n","PeriodicalId":39169,"journal":{"name":"Recent Patents on Mechanical Engineering","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-05-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Abnormal Status Detection of Catenary Based on TSNE Dimensionality Reduction Method and IGWO-LSSVM Model\",\"authors\":\"Yu Guo, Yi Lingzhi, Wang Yahui, Dong Tengfei, Yu Huang, Shen Haixiang\",\"doi\":\"10.2174/2212797616666230505151008\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n\\nCatenary is a crucial component of an electrified railroad's traction power supply system. There is a considerable incidence of abnormal status and failures due to prolonged outside exposure. Driving safety will be directly impacted if an abnormal status or failure occurs. Currently, catenary detection vehicles are the most often utilized technique for gathering data and identifying faults based on manual experience. However, this technology cannot meet the demands of prompt detection and correction of faults in railways engineering due to its extremely low work efficiency.\\n\\n\\n\\nBased on the above, an abnormal status detection method of catenary based on the improved gray wolf (IGWO) algorithm optimized the least squares support vector machine (LSSVM) with the t-distributed stochastic neighbor embedding (TSNE) is proposed in this paper. In order to improve the accuracy of catenary abnormal status detection and shorten the detection time.\\n\\n\\n\\nFirstly, the TSNE dimensionality reduction technology is used to reduce the original catenary data to three-dimensional space. Then, in order to address the issue that the parameters of the LSSVM detection model are hard to determine, the improved GWO algorithm is used to optimize the penalty factor and kernel parameter in the LSSVM and establish the TSNE-IGWO-LSSVM catenary abnormal status detection model. Finally, contrasting experimental results of different detection models. The T-distributed Stochastic Domain Embedding (TSNE) is an improved nonlinear dimensionality reduction method based on the Stochastic Neighbor Embedding (SNE). TSNE no longer adopts the distance invariance in linear dimensionality reduction methods such as ISOMAP. TSNE is much better than the linear dimensionality reduction method in the reduction degree of the original dimension. The GWO algorithm, which is frequently used in engineering research, has the advantages of a simple model, great generalization capability, and good optimization performance. The premature convergence is one of the remaining flaws. By applying a good point set to initialize the gray wolf population and the nonlinear control parameters, the gray wolf algorithm is improved in this research. The IGWO algorithm effectively makes up for the problem of balancing the local exploitation and global search capabilities of GWO. Additionally, this IGWO algorithm performs the Cauchy variation operation on the current generation optimal solution to improve population diversity, enlarge the search space, and increase the likelihood of the algorithm escaping the local optimal solution in order to prevent the algorithm from failing the local optimum. The Least Squares Support Vector Machine (LSSVM) is an improved version of the Support Vector Machine (SVM), which replaces the original inequality constraint with a linear least squares criterion for the loss function. The kernel parameters of the RBF function and the penalty factor, these two parameters directly determine the detection effect of LSSVM. In this paper, the IGWO is utilized to adjust and determine the LSSVM parameters in order to enhance the detection capacity of the LSSVM model.\\n\\n\\n\\nIn this paper, in order to minimize the experiment's bias, the training data and the test data are allocated in a ratio of 4:1, the training data are set to 400 groups, and the test data are set to 100 groups. After training the five models, the test data is used to validate and compare the detection capacity of the models. After each of the five detection models was tested ten times, the TSNE-IGWO-LSSVM model is compared with the IGWO-LSSVM model, the TSNE-FA-LSSVM model, the GWO-LSSVM model, and the GWO-ELM model, the results show that the TSNE-IGWO-LSSVM model has the highest average detection accuracy of 97.1% and the shortest running time of 26.9s. For the root mean squared error (RMSE) and the root mean squared error (RMSE), the TSNE-IGWO-LSSVM model is 0.17320 and 2.51% respectively, which is the best among the five models, indicating that it not only has higher detection accuracy but also better convergence of detection accuracy than the other models.\\n\\n\\n\\nWith the thousands of miles of catenary and the complexity of the data, it is crucial to shorten the running time in order to improve the efficiency and ease the burden of the processors. The experiments demonstrate that the TSNE-IGWO-LSSVM detection model can detect the abnormal status of catenary more accurately and quickly, providing a new method for the abnormal status detection of catenary, which has certain application value and engineering significance in the era of fully electrified railways.\\n\",\"PeriodicalId\":39169,\"journal\":{\"name\":\"Recent Patents on Mechanical Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-05-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Recent Patents on Mechanical Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2174/2212797616666230505151008\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Recent Patents on Mechanical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2174/2212797616666230505151008","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

摘要

接触网是电气化铁路牵引供电系统的重要组成部分。由于长时间暴露在外界,有相当多的异常状态和故障发生。如果出现异常状态或故障,将直接影响行车安全。目前,接触网检测车辆是最常用的基于人工经验的数据采集和故障识别技术。然而,该技术的工作效率极低,无法满足铁路工程中对故障的及时检测和纠正的需求。在此基础上,本文提出了一种基于改进灰狼(IGWO)算法的接触网异常状态检测方法,该算法基于t分布随机邻居嵌入(TSNE)优化最小二乘支持向量机(LSSVM)。为了提高接触网异常状态检测的准确性,缩短检测时间。首先,利用TSNE降维技术将原始接触网数据降维到三维空间;然后,针对LSSVM检测模型参数难以确定的问题,采用改进的GWO算法对LSSVM中的惩罚因子和内核参数进行优化,建立TSNE-IGWO-LSSVM接触网异常状态检测模型。最后,对比了不同检测模型的实验结果。t分布随机域嵌入(TSNE)是在随机邻居嵌入(SNE)的基础上改进的非线性降维方法。TSNE不再采用ISOMAP等线性降维方法中的距离不变性。TSNE在原始维数的降维程度上明显优于线性降维方法。GWO算法具有模型简单、泛化能力强、优化性能好等优点,是工程研究中经常使用的算法。过早趋同是尚存的缺陷之一。本研究采用良好的点集来初始化灰狼种群和非线性控制参数,对灰狼算法进行了改进。IGWO算法有效地解决了GWO算法在局部利用和全局搜索能力之间的平衡问题。此外,IGWO算法对当前代最优解进行柯西变分运算,提高种群多样性,扩大搜索空间,增加算法逃离局部最优解的可能性,防止算法无法达到局部最优解。最小二乘支持向量机(LSSVM)是支持向量机(SVM)的改进版本,它用损失函数的线性最小二乘准则代替原来的不等式约束。RBF函数的核参数和惩罚因子,这两个参数直接决定了LSSVM的检测效果。本文利用IGWO对LSSVM参数进行调整和确定,以提高LSSVM模型的检测能力。在本文中,为了尽量减少实验的偏差,训练数据和测试数据按4:1的比例进行分配,训练数据设为400组,测试数据设为100组。五个模型训练完成后,使用测试数据对模型的检测能力进行验证和比较。对5种检测模型分别进行10次测试后,将tsn -IGWO-LSSVM模型与IGWO-LSSVM模型、tsn - fa - lssvm模型、GWO-LSSVM模型和GWO-ELM模型进行比较,结果表明tsn -IGWO-LSSVM模型平均检测准确率最高,达到97.1%,运行时间最短,为26.9s。对于均方根误差(RMSE)和均方根误差(RMSE), TSNE-IGWO-LSSVM模型分别为0.17320和2.51%,是5个模型中最好的,这表明它不仅具有更高的检测精度,而且检测精度的收敛性也优于其他模型。由于接触网长达数千英里,数据的复杂性,缩短运行时间对于提高效率和减轻处理器的负担至关重要。实验表明,TSNE-IGWO-LSSVM检测模型能够更加准确、快速地检测接触网的异常状态,为接触网异常状态检测提供了一种新的方法,在铁路全电气化时代具有一定的应用价值和工程意义。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Abnormal Status Detection of Catenary Based on TSNE Dimensionality Reduction Method and IGWO-LSSVM Model
Catenary is a crucial component of an electrified railroad's traction power supply system. There is a considerable incidence of abnormal status and failures due to prolonged outside exposure. Driving safety will be directly impacted if an abnormal status or failure occurs. Currently, catenary detection vehicles are the most often utilized technique for gathering data and identifying faults based on manual experience. However, this technology cannot meet the demands of prompt detection and correction of faults in railways engineering due to its extremely low work efficiency. Based on the above, an abnormal status detection method of catenary based on the improved gray wolf (IGWO) algorithm optimized the least squares support vector machine (LSSVM) with the t-distributed stochastic neighbor embedding (TSNE) is proposed in this paper. In order to improve the accuracy of catenary abnormal status detection and shorten the detection time. Firstly, the TSNE dimensionality reduction technology is used to reduce the original catenary data to three-dimensional space. Then, in order to address the issue that the parameters of the LSSVM detection model are hard to determine, the improved GWO algorithm is used to optimize the penalty factor and kernel parameter in the LSSVM and establish the TSNE-IGWO-LSSVM catenary abnormal status detection model. Finally, contrasting experimental results of different detection models. The T-distributed Stochastic Domain Embedding (TSNE) is an improved nonlinear dimensionality reduction method based on the Stochastic Neighbor Embedding (SNE). TSNE no longer adopts the distance invariance in linear dimensionality reduction methods such as ISOMAP. TSNE is much better than the linear dimensionality reduction method in the reduction degree of the original dimension. The GWO algorithm, which is frequently used in engineering research, has the advantages of a simple model, great generalization capability, and good optimization performance. The premature convergence is one of the remaining flaws. By applying a good point set to initialize the gray wolf population and the nonlinear control parameters, the gray wolf algorithm is improved in this research. The IGWO algorithm effectively makes up for the problem of balancing the local exploitation and global search capabilities of GWO. Additionally, this IGWO algorithm performs the Cauchy variation operation on the current generation optimal solution to improve population diversity, enlarge the search space, and increase the likelihood of the algorithm escaping the local optimal solution in order to prevent the algorithm from failing the local optimum. The Least Squares Support Vector Machine (LSSVM) is an improved version of the Support Vector Machine (SVM), which replaces the original inequality constraint with a linear least squares criterion for the loss function. The kernel parameters of the RBF function and the penalty factor, these two parameters directly determine the detection effect of LSSVM. In this paper, the IGWO is utilized to adjust and determine the LSSVM parameters in order to enhance the detection capacity of the LSSVM model. In this paper, in order to minimize the experiment's bias, the training data and the test data are allocated in a ratio of 4:1, the training data are set to 400 groups, and the test data are set to 100 groups. After training the five models, the test data is used to validate and compare the detection capacity of the models. After each of the five detection models was tested ten times, the TSNE-IGWO-LSSVM model is compared with the IGWO-LSSVM model, the TSNE-FA-LSSVM model, the GWO-LSSVM model, and the GWO-ELM model, the results show that the TSNE-IGWO-LSSVM model has the highest average detection accuracy of 97.1% and the shortest running time of 26.9s. For the root mean squared error (RMSE) and the root mean squared error (RMSE), the TSNE-IGWO-LSSVM model is 0.17320 and 2.51% respectively, which is the best among the five models, indicating that it not only has higher detection accuracy but also better convergence of detection accuracy than the other models. With the thousands of miles of catenary and the complexity of the data, it is crucial to shorten the running time in order to improve the efficiency and ease the burden of the processors. The experiments demonstrate that the TSNE-IGWO-LSSVM detection model can detect the abnormal status of catenary more accurately and quickly, providing a new method for the abnormal status detection of catenary, which has certain application value and engineering significance in the era of fully electrified railways.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Recent Patents on Mechanical Engineering
Recent Patents on Mechanical Engineering Engineering-Mechanical Engineering
CiteScore
0.80
自引率
0.00%
发文量
48
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信